Abstract:Currently, porous SiC ceramics have been a focus of interesting research in the field of porous materials due to their excellent structural properties, high strength, high hardness, and superb mechanical and chemical stabilities even at high temperatures and hostile atmospheres. Porous SiC ceramics have been considered as suitable candidate materials for catalyst supports [1-2], hot gas or molten metal filters [3], high temperature membrane reactors [4], thermal insulating materials [5], gas sensors [6] etc. Porous SiC ceramics are fabricated by various methods including partial sintering [7], carbothermal reduction [8-9], replication or pyrolysis of polymeric sponge [10-12], reaction bonding [13] etc. In all these methods SiC needs to be sintered which requires a very high temperature due to the strong covalent nature of the Si-C bond, selective sintering additives, expensive atmosphere, costly and delicate instrumentation. Processing of porous SiC ceramics at low temperature using a simple technique thus becomes necessary. Bonding of SiC can be done at low temperatures by use of different oxide and non-oxide secondary phases. They include silica, mullite, cordierite, silicon nitride, etc. Various sintering additives are used for the formation of variety of secondary oxide bond phases for formations for porous SiC [14-19] Choice of mullite as a bond for SiC has many advantages. Mullite possesses a high melting point (T m = 1850°C) and a low oxygen diffusion coefficient (5.6 x 10 -14 m 2 /sec at 50°C). It has a matching thermal expansion coefficient with SiC (CTE mullite = 5.3 ×10 -6 /K; CTE SiC = 4.7 ×10 -6 /K at RT-1000 °C) and a high strength that can be retained up to a very high temperature. Different sources of aluminum, such as Al 2 O 3 , Al, AlN, and Al (OH) 3 powders were used for the formation of mullite bonded porous SiC ceramics (MBSC) [20-21]. However, the mullitization temperature of 1550 o C is still necessary. In this work, mullite bonded porous SiC ceramics were fabricated by an in situ reaction-bonding process; the mixture of clay and CaCO 3 were chosen as sintering additives to lower the mullitization reaction between Al 2 O 3 and oxidation-derived SiO 2. The effect amount of alumina, sintering temperature and other sintering aids on material property such as porosity/pore size distribution mechanical and micro structural properties of porous oxide bonded SiC ceramics were studied.

Effects of chemical corrosion and thermal shock on the properties of mullite- and cordierite-bonded porous SiC ceramics prepared using waste fly ash

Preparation of Fly Ash-Based Porous Ceramic with Alumina as the Pore-Forming Agent

Properties and performance of cordierite-bonded porous silicon carbide membrane prepared using waste fly ash and other oxide additives

Fly Ash Constituent-Silica and Alumina Role in the Synthesis and Characterization of Cordierite Based Ceramics

Mechanical and microstructural properties of cordierite-bonded porous SiC ceramics processed by infiltration technique using various pore formers

Effect of Sic on Microstructures and Properties of Cordierite-Mullite Multiphase Ceramics Material

The Effect of Bond Phase Additive and Sintering Temperature on the Properties of Mullite Bonded Porous SiC Ceramics

Fabrication and Properties of Cordierite–mullite Bonded Porous SiC Ceramics

Experimental Study on the Mullite-SiC Composite Materials From Fly Ash

Fabrication and Properties of SiC/mullite Composite Porous Ceramics

Effect of Alkaline Oxides (cao and MgO) on the Mechanical Properties of SiC-based Foam Ceramics

Preparation of anorthite-based porous ceramics using high-alumina fly ash microbeads and steel slag

Influence of additive contents on the properties of SiC ceramic membranes and their performance in oil‐water separation

Phase evolution and sintering characteristics of porous mullite ceramics produced from the flyash-Al(OH)3 coating powders

Effect of V2O5 on the Properties of Mullite Ceramics Synthesized from High-Aluminum Fly Ash and Bauxite

Effect of Activator on Properties of SiC Porous Ceramics

Effect of Silicon Source (Fly Ash, Silica Dust, Gangue) on the Preparation of Porous Mullite Ceramics from Aluminum Dross

Effect of Different Aluminum Sources on the Preparation and Properties of SiC/Cordierite Composite Porous Ceramics

Effect of Silicon Addition on Mechanical Properties of Mullite-Sic Composite Refractories

Enhanced Mechanical Properties and Thermal Shock Resistance of Si2BC3N Ceramics with SiC Coated MWCNTs

Microstructural evolution and properties enhancement of SiC refractory castables bonded with the special CNFs/calcium aluminate cement