Abstract:To further improve the thermal shock resistance and ablation resistance of SiBCN system ceramics targeted much harsh environment, both ultra-high temperature ceramic phases and carbon fibers are expected to be incorporated simultaneously as the reinforcements. However, tough problems like difficulty in densification as well as degradation of C fibers (Cf) due to interfacial reaction usually cannot be avoided. Thus, in this study, Zr as well as chopped Cf with BN coating were introduced into SiBCN ceramics by mechanical alloying and after hot-pressing sintering to prepare C/SiBCNZr composites. The structure and phase component development have been characterized in detail by XRD, SEM, TEM and XPS etc., and mechanical properties, fracture behavior and toughening mechanisms were also investigated. Zr-B and Zr-O bonds are detected besides Si-C, N-B and N-B-C bonds when pre-alloyed ZrB2 amorphous powder was incorporated into SiBCN system by further mechanical-alloying treatment. After hot-pressing, the ultra-high temperature phases of ZrB2 and ZrN were formed as expected besides the original matrix phases of BN(C) and SiC. Excellent mechanical properties can be obtained for SiBCNZr ceramic. The BN coating on carbon fibers successfully avoids the severe fiber degradation and makes it possible for moderating strong interface bonding, which ensuring the debonding, crack deflection, fiber pulling-out and bridging during the fracture. As a result, the C/SiBCNZr composites retain good mechanical properties and fractures in a pseudoplastic fracture manner, showing better potential applications in harsh environments. Optimization of the BN coating on Cf and Zr incorporation by pre-mechanical alloying can be a good route to achieve Cf/SiBCNZr composites with a better balance between thermal shock resistance, ablation resistance and mechanical properties.

Microstructural evolution and properties enhancement of SiC refractory castables bonded with the special CNFs/calcium aluminate cement

Effects of different carbon-containing calcium aluminate cements on the microstructure and properties of Al2O3–SiC–C castables

Catalytic carbon-bed sintering of CNTs/calcium aluminate cement and its effects on thermal mechanical properties of refractory castables

Influences of Novel Si2BC3N Antioxidant on the Structure and Properties of Al2O3-SiC-C Castables: in Air and Coke Bedded Atmosphere

Nanoscale toughening of low carbon Al2O3‐C refractories by means of SiCnw/Al2O3 composite reinforcement

Preparation and properties of alumina-carbon castables using SiC nanofiber coated graphite flake

Enhanced Mechanical Properties and Thermal Shock Resistance of Si2BC3N Ceramics with SiC Coated MWCNTs

Influence of mono-carbonate hydrates on mechanical properties of CAC bonded castables fired at 800 °C

Effects of Zr and chopped C fiber on microstructure and mechanical properties of SiBCN ceramics

Evolution in properties of high alumina castables containing basic zinc carbonate

Effects of SiCnw/Al2O3 composite powders on properties of Al2O3–SiC refractory castables

Effect of SiC Nanowires on the Thermal Shock Resistance of Joint Between Carbon/carbon Composites and Li2O–Al2O3–SiO2 Glass Ceramics

Enhanced Strengths and Thermal Shock Resistance of SiC-BN-10 Vol% Cf Composites Through ZrB2 Addition

Fabrication and mechanical properties of carbon fibers/lithium aluminosilicate ceramic matrix composites reinforced by in-situ growth SiC nanowires

Preparation, properties, and interfacial bonding mechanism of MgO–Mg2SiO4–SiC–C refractories

Influence of bonding systems on the properties of Al 2 O 3 -MgO refractory castables: Aluminate cement and alumina silica gel

Microstructure Evolution and Mechanical Behaviors of SiCp/CNTs Hybrid Reinforced Al-Si-Cu-Mg Composite by Semi-solid Stir Casting

In-situ formation of plate-like Al4O4C and MWCNTs in Al2O3–C refractories with Al4SiC4 additives

Microstructure and Mechanical Properties of SiC F /sibcn Ceramic Matrix Composites

Effect of Nano SiC on Microstructure and Mechanical Properties of BN-ZrO2-SiC Multiphase Ceramics

In Situ Synthesis and Interfacial Bonding Mechanism of SiC in MgO–SiC–C Refractories