Abstract:CaO and MgO are both reported as effective activators for blast furnace slag. However, the synergistic effect of these two components on the mechanical properties of alkali-activated blast furnace slag remains unclear. In this study, the flexural and compressive strengths of alkali-activated blast furnace slag powder with MgO and CaO range from 0% to 30% by the mass ratio of alkali-activated blast furnace slag powder are investigated. Moreover, the dry shrinkage rate of alkali-activated blast furnace slag powder is measured. One percent refractory fibers by volume of binder materials are added in the alkali-activated blast furnace slag. Some refractory fibers are treated with water flushing, meanwhile, some refractory fibers are directly used without any treatment. Finally, the scanning electron microscope, the thermogravimetric analysis curves and the XRD diffraction spectrums are obtained to reflect the inner mechanism of the alkali-activated blast furnace slag powder's mechanical properties. The water-binder ratios of the alkali-activated blast furnace slag powder are 0.35 and 0.42. The curing ages are 3 d, 7 d and 28 d. The measuring temperature for the specimens ranges from 20 °C to 800 °C. Results show that the flexural and compressive strengths increase with the increased curing age, the decreased water-binder ratio and the addition of refractory fibers. The water-treated refractory fibers can improve the mechanical strengths. The mechanical strengths increase in the form of a quadratic function with the mass ratio of MgO and CaO, when the curing age is 3 d, the increasing effect is the most obvious. A higher water-binder ratio leads to an increasing the drying shrinkage rate. The activated blast furnace slag powder with CaO shows a higher drying shrinkage rate. The mechanical strengths decrease with the increasing testing temperature.

Influence of bonding systems on the properties of Al 2 O 3 -MgO refractory castables: Aluminate cement and alumina silica gel

Effect of the hydrotalcite formation on the fracture behavior and corrosion resistance of HA‐bonded alumina‐spinel castables

Thermal shock resistance properties of refractory castables bonded with a CaO-free binder

Effect of magnesium aluminum hydrotalcite on the properties of CAC-bonded castables

Corrosion mechanism of reactive MgO‐bonded Cr2O3‐bearing castables in CaO–Al2O3–Fe2O3–SiO2‐based steel‐making slag

Preparation of CaCO3 coated corundum aggregates by dip-coating and heat treatment and its effects on the properties and microstructures of Al2O3–MgO castables

Corrosion mechanism of cement-bonded Al2O3–MgAl2O4 pre-cast castables in contact with molten steel and slag

Properties of bauxite-mullite castables and corrosion resistance to cement clinker

Influence of mono-carbonate hydrates on mechanical properties of CAC bonded castables fired at 800 °C

Effect of Al2O3 on the Molten Slag Microstructure Information by Molecular Dynamics Simulation and Experimental Analysis

Influence of magnesium-aluminum hydrotalcite on the microstructure and mechanical properties of magnesia castables

Rheological and mechanical properties of aluminosilicious cementitious materials as refractory castable binders

Alkali Resistance Mechanism of Al2O3 SiC Refractory Castable

Improved slag corrosion resistance of MgO–C refractories with calcium magnesium aluminate aggregate and silicon carbide: Corrosion behavior and thermodynamic simulation

Effects of different carbon-containing calcium aluminate cements on the microstructure and properties of Al2O3–SiC–C castables

Evolution in properties of high alumina castables containing basic zinc carbonate

Inhibited Cr(VI) formation in Cr2O3-containing refractory castable using reactive MgO as hydraulic binder

Microstructural evolution and properties enhancement of SiC refractory castables bonded with the special CNFs/calcium aluminate cement

Influence of high alumina fly ash addition on corrosion resistance to BF slag of Al2O3-SiC-C castables

The Influence of CaO and MgO on the Mechanical Properties of Alkali-Activated Blast Furnace Slag Powder

Aluminum lactate role in improving hydration and drying behavior of MgO-bonded refractory castables