Abstract:Light-frame buildings commonly employ shear wall realized by framing and sheathing panels made of wood materials. Recently, much research has focused on the use of engineered bamboo composites to substitute wood in light-frame buildings. The aim of this study is to investigate the thermal insulation performances of bamboo- and wood-based shear walls in light-frame buildings. First, an archetype wall with characteristics similar to those commonly employed in wood shear walls was defined. Starting from the archetype wall, four specific configurations representing one classical full wood-based configuration, one hybrid bamboo-wood-based configuration and two full bamboo-based configurations with different studs thickness were identified to be tested. The thermal conductivity of the materials composing the wall was measured using a hot plate apparatus varying the temperature in the range of 10-50 degrees C. The anisotropy of the thermal conductivity was analyzed for the wood and bamboo materials. The four specific configurations of the archetype wall were tested in a guarded hot box apparatus in order to determine the thermal resistance and transmittance. The experimental results were compared with the estimates obtained using the ISO 6946 procedure and a Finite Element (FE) model of the wall, both adopting the thermal conductivity previously measured. A good agreement between the experiments and the models was found with the better results obtained with the FE model. Finally, the so-validated FE model was used to optimize the archetype wall with only bamboo-based materials to the Chinese thermal regions, showing the possibility of real application in the practice. All the results indicate that the thermal insulation performances of engineered bamboo composites are slightly lower compared with wood ones, both at the material and the shear wall levels. This indicates that there is the possibility of using bamboo-based shear walls in light-frame buildings ensuring thermal insulation performances similar to classical wood-based one. (C) 2018 Elsevier B.V. All rights reserved.

Simulation calculation and analysis of building energy consumption of multi-story glued laminated timber structures

Thermal Insulation Performance of Bamboo- and Wood-Based Shear Walls in Light-Frame Buildings

Fire Simulation Test and Analysis of Laminated Bamboo Frame Building

Thermal Performance of Cross-Laminated Timber (CLT) and Cross-Laminated Bamboo and Timber (CLBT) Panels

Experimental research on fire safety of lightweight bamboo frame buildings

Assessment of Energy Saving Potential by Replacing Conventional Materials by Cross Laminated Timber (CLT)-A Case Study of Office Buildings in China

A parametric analysis of future climate change effects on the energy performance and carbon emissions of a Chinese prefabricated timber house

Tests on full-scale and static analysis models of the wood-framed building stucture horizontaly loaded

Energy Simulations of a Building Insulated with a Hemp-Lime Composite with Different Wall and Node Variants

Simulation on Thermal Performance of Energy-Saving Windows and Doors and Its Influence on Building Energy Consumption

DURABILITY AND ENERGY EFFICIENCY IN MASS TIMBER BUILDINGS: A SUSTAINABLE APPROACH TO MODERN CONSTRUCTION

Evaluation on energy conservation of a full-scale wood structure house

Processing bulk wood into a light-permeable passive radiative cooling material for energy-efficient building

Simulation Analysis and Scheme Optimization of Energy Consumption in Public Buildings

Investigating Building Sustainability by Applying Sensitivity Analysis of Impact Factors During Design Stage

Field Test and Simulation Analysis of Thermal Performance of Bamboo Steel Composite Wall in Different Climate Regions

Structural Design and Analysis for a Timber-Concrete Hybrid Building

Acoustic performance analysis of wooden structure building wall by integrating BIM technology and impedance tube method

Measuring-Up In Timber: A Critical Perspective On Mid- And High-Rise Timber Building Design

Study on air tightness and thermal comfort of high-rise Glulam structure buildings

Optimization of window-wall-ratio using bim-based energy simulation