Abstract:Light-frame buildings commonly employ shear wall realized by framing and sheathing panels made of wood materials. Recently, much research has focused on the use of engineered bamboo composites to substitute wood in light-frame buildings. The aim of this study is to investigate the thermal insulation performances of bamboo- and wood-based shear walls in light-frame buildings. First, an archetype wall with characteristics similar to those commonly employed in wood shear walls was defined. Starting from the archetype wall, four specific configurations representing one classical full wood-based configuration, one hybrid bamboo-wood-based configuration and two full bamboo-based configurations with different studs thickness were identified to be tested. The thermal conductivity of the materials composing the wall was measured using a hot plate apparatus varying the temperature in the range of 10-50 degrees C. The anisotropy of the thermal conductivity was analyzed for the wood and bamboo materials. The four specific configurations of the archetype wall were tested in a guarded hot box apparatus in order to determine the thermal resistance and transmittance. The experimental results were compared with the estimates obtained using the ISO 6946 procedure and a Finite Element (FE) model of the wall, both adopting the thermal conductivity previously measured. A good agreement between the experiments and the models was found with the better results obtained with the FE model. Finally, the so-validated FE model was used to optimize the archetype wall with only bamboo-based materials to the Chinese thermal regions, showing the possibility of real application in the practice. All the results indicate that the thermal insulation performances of engineered bamboo composites are slightly lower compared with wood ones, both at the material and the shear wall levels. This indicates that there is the possibility of using bamboo-based shear walls in light-frame buildings ensuring thermal insulation performances similar to classical wood-based one. (C) 2018 Elsevier B.V. All rights reserved.

Field Test and Simulation Analysis of Thermal Performance of Bamboo Steel Composite Wall in Different Climate Regions

Thermal Insulation Performance of Bamboo- and Wood-Based Shear Walls in Light-Frame Buildings

Thermal Performance of Cross-Laminated Timber (CLT) and Cross-Laminated Bamboo and Timber (CLBT) Panels

Research And Applicant Of Solar Energy-Prefabricated Bamboo Pole House

Fire Simulation Test and Analysis of Laminated Bamboo Frame Building

Fire-resistance Simulation and Test of Prefabricated Bamboo House

Experimental research on fire safety of lightweight bamboo frame buildings

Experimental Research on Standardized Bamboo Culm Components for Developing Prefabricated Bamboo Building

EXPERIMENTAL RESEARCH ON FIRE-RESISTANT PERFORMANCE OF GLUBAM STRUCTURAL WALL

Experimental Research and Application of Prefabricated Bamboo Pole House

Connections Used for Cold-Formed Steel Frame Shear Walls Sheathed with Engineered Bamboo Panels

Study on heat transfer of light steel-framed composite walls in cold area

RESEARCH ON THE ENERGY-SAVING DESIGN SCHEMES OF LIGHT GAUGE STEEL-FRAMED COMPOSITE WALLS OF RESIDENTIAL CONSTRUCTION

Temperature Field Simulation of Building Envelopes

Study on Flexural Behaviour of Box Section Bamboo-Steel Composite Beams

Experiments and Numerical Simulations on the Seismic Performance of Steel-Frame Composite Wallboard Shear Walls

Bamboo as a sustainable construction material for residential buildings in the cold and severe cold regions of China

THE ENERGY SAVING DESIGN METHOD AND THERMAL BEHAVIOR RESEARCH DEVELOPMENT OF LIGHT-GAUGE STEEL-FRAMED COMPOSITE WALLS

Experimental and simulation study on the thermal performance of a novel flue composite wall

Thermal Performance of Several Wood-Plastic Composite (WPC) Walls

SIMULATION AND EVALUATION ON THE THERMAL PERFORMANCE OF PCM WALLBOARD ROOMS LOCATED IN VARIOUS CLIMATE REGIONS OF CHINA IN SUMMER