Abstract:Building Services Engineering Research and Technology, Ahead of Print. The use of high-conductivity porous medium is an effective method to enhance the heat transfer rate of phase change material (PCM) in thermal energy storage (TES), reducing the energy consumption of low-carbon buildings. This paper establishes a solid-liquid phase change lattice Boltzmann model of a TES unit and investigates the effects of Rayleigh number, inclination angle, porous array, and porosity. The findings indicate that inserting the porous medium enhances conductive heat transfer and weakens convective heat transfer. When the Rayleigh number is increased from 103 to 104, the liquid fraction increases by 3.0%, while an increase from 104 to 105 only results in a 1.6% increase, suggesting a diminishing effect of increasing the Rayleigh number. Results also show that the inclination angle can be disregarded in this study. Furthermore, increasing the specific surface area enhances conductive heat transfer. However, when the array n is changed to 7, the fastest variation of liquid fraction is obtained among the range from 5 to 9. Increasing the porosity will delay the moment that temperature standard deviation reaches to the maximum, getting the temperature distribution more nonuniform. The findings from this paper are valuable for the design of TES systems in low-carbon buildings.Practical applicationThe porous medium can enhance heat transfer in the phase change process. In the field of low-carbon buildings, porous medium is applied to strengthen the energy storage rate. By investigating the parameters of the Rayleigh numbers, inclination angles, porosities and arrangement of porous medium arrays of the composed energy storage unit, the regularity of the effects on the energy characteristics are obtained, which would provide some valuable practice references for designing these parameters of the energy storage units in the future energy-efficient building sector.

Heat transfer performance of phase change energy storage building materials and its application in energy efficient buildings

Analysis of the Thermal Performance of the Embedded Composite Phase Change Energy Storage Wall

Energy, Economic and Environmental (3E) Analysis of Residential Building Walls Enhanced with Phase Change Materials

Thermal insulation performance of buildings with phase-change energy-storage wall structures

Research on Heat Transfer Performance of Passive Solar Collector-Storage Wall System with Phase Change Materials

Effect of thermal parameters on heat storage and release performance of phase change material composite wall

Performance Enhancement of Phase Change Thermal Energy Storage Unit Using Fin and Copper Foam

Thermal Performance of a Novel Building Wall Incorporating a Dynamic Phase Change Material Layer for Efficient Utilization of Passive Solar Energy

Experimental Study on Heat Storage/Release Performances of Composite Phase Change Thermal Storage Heating Wallboards Based on Photovoltaic Electric-Thermal Systems

Study on optimization of thermal property parameters of phase change wallboard and its application simulation in the building

Numerical and Experimental Study on the Performance of a Thermal Energy Storage in a Solar Building

Performance analysis of a novel phase-change wall of wood structure coupled with sky-radiation cooling

Analysis of the Applicability of a Phase-Change Energy Storage Wall for Public Buildings in Hot Summer and Cold Winter Climate Zones

Research on Thermal Properties of Phase Change Wallboard Room Based on Air Condition Cold Storage

An Improved Heat Transfer Model for Building Phase Change Material Wallboard

Experimental investigation on thermal performance of porous composite phase change storage device under different operating modes and parameters

Multi-scale Simulation Study on the Heat Transfer Characteristics of Phase-Change Walls

A Study on a Novel Phase Change Material Panel Based on Tetradecanol/Lauric Acid/Expanded Perlite/Aluminium Powder for Building Heat Storage

Investigations of double layer phase change walls with expanded graphite on the temperature and energy consumption

The Development and Numerical Analysis of a New Heat Exchanger Based on Composite Shape-Stabilize Phase Change Material

Heat transfer investigation on the thermal energy storage using phase change material in low-carbon building