Abstract:In order to understand the thermal storage performance analysis of building envelope, the author proposes a research on thermal storage performance analysis of building envelope based on Big data sensor network. The author first compares and analyzes the thermal storage performance parameter systems of different theoretical methods, and determines the key characterization parameters of thermal storage performance under different working conditions based on the analysis of the thermal storage process. Second, in order to compare and verify the measured and simulated indoor temperature of the building, two groups of buildings with identical exterior wall insulation performance and distinct thermal storage performance were chosen. Three distinct thermal storage levels of the building?s exterior walls were used to simulate and analyze the internal surface temperature, heat flux density, and building cooling and heating load. Summer night ventilation was used to investigate the effect of ventilation volume on building cooling loads. In the end, a provincial office building was chosen as the research subject. The structure comprises of two stories, one underground and two over the ground, with a north hub point of 180?. The investigation object is a two-story room. The trial results demonstrate that the deliberate outcomes are in great concurrence with the mimicked results. For the district of the region, under a similar protection execution of the nook structure, the inner surface temperature of the weighty construction outside wall is higher in winter, lower in summer, with a higher intensity load in winter and a lower cooling load in summer. The proper air changes each hour of building night ventilation is 16 ach, and the effect on the cooling heap of weighty structures is huge. Demonstrated the precision of the reproduction technique and model.

Temperature Field Simulation of Building Envelopes

Numerical Study On Energy Consumption Characteristics For Wall Insulation Structure In Hot Summer And Cold Winter Zone

NUMERICAL METHOD ON OUTDOOR THERMAL ENVIRONMENT OF SINGLE BUILDING

The design of a comfortable thermal environment by simulation: A case study

STUDY ON SOLAR RADIATION EFFECTS ON THE MICROCLIMATE OF BUILD ING ENVELOPE:THE CHARACTERISTICS OF EXTERNAL SURFACE TEMPERATURE AND AIRFLOW

Temperature field of masonry structure considering solar radiation

Numerical analysis of outdoor thermal environment around buildings

Study on Field Test Method of Heat Transfer Cofficient of Existing Building Envelope

Simulating and Analysing Temperature Field of Concrete Base Slab using Construction Period Based on Finite Element

Comparative study on numerical simulation of temperature field of farm house with different roof forms

Experimental Analysis Of Air Temperature Around A Single Building Under The Effect Of Solar Radiation

Numerical simulation of microclimate around residential buildings

Temperature fields of external walls of different thermal insulation placements

Dynamic Characteristics Simulation of Variable Temperature Heating Room

Numerical Simulation of Temperature Field on the Fiber Reinforced Concrete Block Wall Filling with Compressed Blocks of Straw

Simulation Analysis on Three Dimensional Unsteady Heat Conduction of Building Thermal Bridges

Analysis on problems existed in simulation of indoor thermal environment for residential buildings

Thermally anisotropic building envelope for thermal management: finite element model calibration using field evaluation data

Thermal storage performance analysis of building envelope based on big data sensor network

Experimental and numerical investigation on the temperature field and effects of a large-span gymnasium under solar radiation

Estimation of Indoor Temperature Increments in Summers Using Heat-Flow Sensors to Assess the Impact of Roof Slab Insulation Methods