Abstract:<p>A comprehensive understanding of the thermal environment of building spaces is essential to the improvement of building energy-saving design and human comfort. However, current measurements of the thermal environment are limited by testing instruments, measurement points, etc., and only the parameters of a given measurement point can be considered rather than those of a plane covering the entire space. Besides, there are few studies on the spatial visualization of indoor thermal environment. To solve these problems, this paper proposes a method that combines point measurement and spatial interpolation to generate a spatial temperature distribution map. The exhibition hall of an office building in Shanghai was selected as an example. Eleven spatial interpolation methods (SIMs) were applied by Surfer to obtain contour maps after inputting the coordinates and air temperature of every measurement point. By comparing the root mean square errors (RMSEs) of 11 SIMs, it was found that the SIM with the smallest error was inverse distance to a power method, whose RMSE reached 0.87 °C on rainy days and 0.80 °C on sunny days. Therefore, the inverse distance to a power method was finally applied to generate a visual stacked temperature distribution map that serves as a basis for spatial design and retrofitting. The proposed method aims to improve the limitations in terms of accuracy and efficiency in the post-occupancy evaluation and make architects accurately analyse the indoor temperature distribution, which provides architects with data-based support for applying passive design strategies, thus facilitating reasonable energy-saving planning, designing, or retrofitting.</p>

Analysis on problems existed in simulation of indoor thermal environment for residential buildings

Verification on the Simulation Result of Residential Building Energy Consumption of Occupant Behavior in the Hot Summer and Cold Winter Zone with DeST

Numerical Study On Energy Consumption Characteristics For Wall Insulation Structure In Hot Summer And Cold Winter Zone

Energy saving effect of external thermal insulation of residential building under actual energy usage condition in hot summer and cold winter zone

Numerical Study on Wall Insulation Construction Affecting the Energy Consumption under the Intermittent and Loculose Energy Use

Investigation and Research on the Indoor Environment of Traditional Architecture of She Minority Nationality in Zhejiang,China

Simulation of the Summer Indoor Thermal Condition of a Traditional Chinese Residential Building in Anhui

The design of a comfortable thermal environment by simulation: A case study

Temperature Field Simulation of Building Envelopes

Simulation of Residential Energy Consumption Based on Software of DeST

Study on Simulation Method of Heating and Air-conditioning Energy Consumption of Residential Buildings

Examination and Optimization of Classroom Indoor Environments in China’s Hot Summer and Cold Winter Regions

Building environment design simulation software DeST(7):simulation and analysis of air handling process

Introduction on a Simulation Software Framework for Building Thermal Environment Integrated with Indoor Air Quality

Numerical simulation of microclimate around residential buildings

Numerical analysis of outdoor thermal environment around buildings

Simulation of energy consumption of air conditioning system for an office building

Numerical Simulation of Thermal Environment for Outdoor Units at Building Re-Entrant

Spatial interpolation-based analysis method targeting visualization of the indoor thermal environment

Analysis of the long-term effects of solar radiation on the indoor thermal comfort in office buildings

Study on Outdoor Thermal Environment of Apartment Block in Shenzhen, China with Coupled Simulation of Convection, Radiation and Conduction