Abstract:Abstract Windows are of great importance in improving the energy efficiency of buildings. It is possible to achieve this with the help of the regeneration of window design. The amount of energy used, the expense of heating and cooling, and the emissions of greenhouse gases that contribute to climate change can all be significantly reduced by improving the energy efficiency of windows. For this, computer modeling and BIM-based simulation programs provide significant timesaving in simultaneously evaluating design variations’ visual and thermal results. This study selected a four-story residential building to analyze the energy load and thermal comfort of the windows redesign and examine the energy-saving potential for residential buildings. To analyze the renewed window design strategies, a four-story apartment building is selected as a case study in Izmir/Turkey (38° 4′, 27° 2′). This apartment is built on a 90 m2 gross floor area. The existing indoor environmental conditions of the flat are generally observed as cool and low illuminated by the occupants, so the window design options must be compared and renewed. As the first option, current conditions are simulated. The second option is to simulate different patterns for window-to-wall ratio (WWR). Moreover, the third option is to simulate different types of glass in each window. Currently, the WWR of the selected flat in the north, east and south directions is around 10%. But more is needed to provide daylight to the apartment. This article used Autodesk Revit and Green Building Studio simulations to investigate WWR and glass types and evaluate energy use intensity’s (EUI) impact. As a result, this study shows that a 10% WWR on all building facades leads to an EUI of 993.9 MJ/m2/year. In contrast, increasing the WWR to 95% significantly increased EUI, reaching 2121 MJ/m2/year. In addition, it has been shown that the use of low U-value glasses, such as translucent wall panels and super-insulated three-pane clear Low-E, can provide energy savings of up to 5% per year, and especially the super-insulated three-pane Low-E glass type provides the highest efficiency on all facades.

Optimization of window-wall-ratio using bim-based energy simulation

Energy-efficiency Strategies of Residential Envelope in China’s Hot Summer–Cold Winter Zone Based on Intermittent Thermal Regulation Behaviour

Investigating Building Sustainability by Applying Sensitivity Analysis of Impact Factors During Design Stage

Energy simulation and modeling for window system: A comparative study of life cycle assessment and life cycle costing

Environmental Performance Optimization of Window–wall Ratio for Different Window Type in Hot Summer and Cold Winter Zone in China Based on Life Cycle Assessment

Impact Analysis of Window-Wall Ratio on Heating and Cooling Energy Consumption of Residential Buildings in Hot Summer and Cold Winter Zone in China

Optimization Analysis of the Residential Window-to-Wall Ratio Based on Numerical Calculation of Energy Consumption in the Hot-Summer and Cold-winter Zone of China

Sensitivity Analysis for Carbon Emissions of Prefabricated Residential Buildings with Window Design Elements

Effect of window-to-wall ratio on measured energy consumption in US office buildings

Assessment of the impact of windows and building orientation on the energy intensity of container houses using BIM

Optimising Window-to-Wall Ratio for Enhanced Energy Efficiency and Building Intelligence in Hot Summer Mediterranean Climates

Analyzing the energy analysis tool (The Autodesk Insight 360) of BIM during the early stages of the design process in terms of window factors in a single-family house

LCA-based Optimization of Window-wall Ratio and Window Materials of Typical Office Building in Shanghai

A Multi-Objective Window Placement Approach Using BIM and Surrogate Model

Optimizing Window Glass Design for Energy Efficiency in South Korean Office Buildings: A Hierarchical Analysis Using Energy Simulation

Assessment of window renovation potential in an apartment with an energy performance approach

Comprehensive multi-objective optimization of external window design for energy-efficient and comfortable buildings

Analysis of the Influence of External Wall Material Type on the Thermal Bridge at the Window-to-Wall Interface

Optimizing Window Configurations for Energy-Efficient Buildings with Aluminum Alloy Frames and Helium-Filled Insulating Glazing

Optimization of exterior wall insulation in office buildings based on wall orientation: Economic, energy and carbon saving potential in China

Research on Selection of Exterior Window of Residence Building Based on Numerical Simulation.