Abstract:Knowledge of the influence of factors determining energy consumption in buildings is very important for the possibility of effective energy saving. This article describes the results of an original study on the analysis of the annual energy demand for heating (QH;nd), cooling (QC;nd), and annual usable energy demand (QH/C;nd = QH;nd + QC;nd) assumed as objective functions of a designed single-family building, which can be classified as a typical representative of currently built houses in Poland. It was assumed that the object of study was located in the climatic conditions of north-eastern Poland. The study takes into consideration three groups of selected parameters: architectural/spatial, structural, and physical properties of windows. The research was carried out in a single-family building, as energy consumption in residential buildings accounts for a significant part of the total energy consumption in buildings. In the group of architectural/spatial parameters, the height of rooms in the building (h) and the window area change coefficient (k) were taken into consideration. The design parameters pertained to the solutions of building components: the density of the material of the inner layer of the external walls (ρ1), the density of the material of internal walls (ρ2), and the thickness of internal walls (d). In the third group of parameters, the heat transfer coefficient of the glazing (Ug) and the total solar transmittance of the glazing (g) were considered. Deterministic mathematical models of these dependencies were developed on the basis of the results of a computational experiment, obtained by performing a simulation with the use of the DesignBuilder software, based on the EnergyPlus computational engine. The models allowed the authors to estimate the degree and nature of the influence of the examined factors on the building's energy demand. As a result of the optimization of parameters according to the energy criterion, the contribution of each of the three groups of parameters to energy saving was determined. Deterministic numerical optimization using MATLAB was applied. It turned out that the factors from the first group played the most important role in energy savings (40.0%), and the factors from the third group contributed slightly less (25.7%). The contribution of the characteristics from the second group was 4.2% of the total value of energy saving. This information can be useful to scientists, as well as engineers and policymakers, in making correct decisions when designing new residential buildings.

STUDY ON THE ENERGY SAVING EFFECT OF RESIDENTIAL WINDOWS

Energy saving effect of external thermal insulation of residential building under actual energy usage condition in hot summer and cold winter zone

Energy Efficiency For Airtightness And Exterior Wall Insulation Of Passive Houses In Hot Summer And Cold Winter Zone Of China

Study on the influence of key parameters of exterior window structure on building energy saving effect

Anti-insulation Behavior for Exterior Wall External Insulation on Residential Buildings in Hot Summer and Cold Winter Zone

Energy-efficiency Strategies of Residential Envelope in China’s Hot Summer–Cold Winter Zone Based on Intermittent Thermal Regulation Behaviour

Study on Energy Saving Effect of Heat-Reflective Insulation Coating on Envelopes in the Hot Summer and Cold Winter Zone

Effects of external window form on residential building energy consumption

The Effect of Energy Saving and Emission Reduction of Semi-External Window Installation

Simulative Study on Energy Consumption of External Windows in Changsha Residential Buildings

Simulation on Thermal Performance of Energy-Saving Windows and Doors and Its Influence on Building Energy Consumption

Energy Consumption Simulation and Energy Saving Analysis on Envelope of Existing Building

PRINCIPLES OF LOW-E WINDOWS AND THEIR ENERGY-SAVING EFFECT

Influence of window-wall ratio on annual energy consumption for heating and air conditioning in residential buildings

Study of Surrounding Buildings' Shading Effect on Solar Radiation Through Windows in Different Climates

The Influence of Window Systems on Energy Consumption of Public Buildings using Orthogonal Experiment Method

Field Study on Energy Economic Assessment of Office Buildings Envelope Retrofitting in Southern China

The energy saving index and the performance evaluation of thermochromic windows in passive buildings

Measurement and Evaluation on Effect of Energy Saving Retrofit of Existing Residential Buildings in North China

Optimization of the Selected Parameters of Single-Family House Components with the Estimation of Their Contribution to Energy Saving

Energy-saving doors and windows and current technology research status