Abstract:A method combining molecular dynamics (MD) and Monte Carlo (MC) simulation is used to analyze the short-range ordering and grain boundary (GB) segregation in the bi-crystals of equiatomic CoCrFeNi and Al (8 at%)-CoCrFeNi high-entropy alloys (HEAs). Based on the structures of the two HEAs obtained by the combined MC/MD method, their defect evolution and deformation mechanisms during shear deformation at 300 K are studied. In addition, the bi-crystals of the Al (8 at%)-CoCrFeNi HEA with the inclusion of B2 intermetallic AlNi particles at the GBs are considered. For the CoCrFeNi HEA, the Cr and Fe atoms are revealed to segregate to GBs. In contrast, it is observed in the Al (8 at%)-CoCrFeNi HEA that Al and Fe have a strong tendency to segregate to GBs, while local ordering results in the formation of Fe3Al clusters, which in turn increase the stacking fault energy of the alloy. The GB segregation and the deformation behaviour of the alloys are found to be highly sensitive to the crystallographic orientation of the bi-crystals. The GB segregation, especially by the Al atoms, stabilizes the GBs and resists the plastic deformation through GB sliding and the GB migration. Overall, the Al (8 at%)-CoCrFeNi HEA with Al-atom segregation at GBs demonstrates an increased shear yield strength compared with the material without the Al addition. On the other hand, the AlNi particles reduce the yield strength of the HEA owing to the formation of amorphous structure at the face-centered cubic/B2 interface and thus facilite the GB sliding. The obtained results provide insights into designing HEAs with improved mechanical properties through GB engineering.

Low temperature processing and annealing effects on slip band formation, annealing twins and grain boundary segregation in a high entropy alloy

Cooperative deformation in high-entropy alloys at ultralow temperatures

Simultaneous Twinning and Microband Formation Under Dynamic Compression in a High Entropy Alloy with a Complex Energetic Landscape

An in situ ambient and cryogenic transmission electron microscopy study of the effects of temperature on dislocation behavior in CrCoNi-based high-entropy alloys with low stacking-fault energy

INFLUENCE OF A LOW-TEMPERATURE PLASTIC-DEFORMATION PROCESS ON THE MICROSTRUCTURE OF AN Al-Si-Mg ALUMINUM ALLOY

In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

Deformation and Fracture Mechanisms of an Annealing-Tailored "bimodal" Grain-Structured Mg Alloy

Improving the Tensile Ductility and Uniform Elongation of High-Strength Ultrafine-Grained Al Alloys by Lowering the Grain Boundary Misorientation Angle

Modifying Transformation Pathways in High Entropy Alloys or Complex Concentrated Alloys Via Thermo-Mechanical Processing

Simultaneous Strength-Ductility Enhancement of a Nano-Lamellar AlCoCrFeNi2.1 Eutectic High Entropy Alloy by Cryo-Rolling and Annealing

Comparative study of high-temperature grain boundary engineering of two powder-processed low stacking-fault energy Ni-base superalloys

Deformation substructure development in AlXCoCrFeNi (X = 0, 0.3) high entropy alloy under different influencing factors

Decoupling of Strain and Temperature Effects on Microstructural Evolution During High Shear Strain Deformation

Grain boundary energy effect on grain boundary segregation in an equiatomic high-entropy alloy

Effect of short-range ordering and grain boundary segregation on shear deformation of CoCrFeNi high-entropy alloys with Al addition

Grain Boundary Engineering of a Low Stacking Fault Energy Ni-based Superalloy

Recrystallization behavior and texture evolution during annealing of cryogenic-rolled 3003 aluminum alloy

THE RELATION OF NON-EQUILIBRIUM SEGREGATION AND CRYSTAL DEFECTS

Dynamics and microstructural evolution of bulk amorphous Cu 12.5 Ni 10 Zr 41 Ti 14 Be 22.5 during phase separations: a small-angle neutron scattering approach

Thermal effects on stability of hierarchical microstructure in medium- and high-entropy alloys

Microstructure and Texture of Heavily Cold-Rolled and Annealed Fcc Equiatomic Medium to High Entropy Alloys