Abstract:Deformation processing of immiscible systems is observed to disrupt thermodynamic equilibrium, often resulting in nonequilibrium microstructures. The microstructural changes including nanostructuring, hierarchical distribution of phases, localized solute supersaturation, and oxygen ingress result from high-strain extended deformation, causing a significant change in mechanical properties. Because of the dynamic evolution of the material under large strain shear load, a detailed understanding of the transformation pathway has not been established. Additionally, the influence of these microstructural changes on mechanical properties is also not well characterized. Here, an immiscible Cu-4 at. % Nb alloy is subjected to a high-strain shear deformation (∼200); the deformation-induced changes in the morphology, crystal structure, and composition of Cu and Nb phases as a function of total strain are characterized using transmission electron microscopy and atom probe tomography. Furthermore, a multimodal experiment-guided computational approach is used to depict the initiation of deformation by an increase in misorientation boundaries by crystal plasticity-based grain misorientation modeling (strain ∼0.6). Then, co-deformation and nanolamination of Cu and Nb are envisaged by a finite element method-based computational fluid dynamic model with strain ranging from 10 to 200. Finally, the experimentally observed amorphization of the severely sheared supersaturated Cu-Nb-O phase was validated using the first principle-based simulation using density functional theory while highlighting the influence of oxygen ingress during deformation. Furthermore, the nanocrystalline microstructure shows a >2-fold increase in hardness and compressive yield strength of the alloy, elucidating the potential of deformation processing to obtain high-strength low-alloyed metals. Our approach presents a step-by-step evolution of a microstructure in an immiscible alloy undergoing severe shear deformation, which is broadly applicable to materials processing based on friction stir, extrusion, rolling, and surface shear deformation under wear and can be directly applied to understanding material behavior during these processes.

Decoupling of Strain and Temperature Effects on Microstructural Evolution During High Shear Strain Deformation

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Extended Shear Deformation of the Immiscible Cu–Nb Alloy Resulting in Nanostructuring and Oxygen Ingress with Enhancement in Mechanical Properties

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Coupling Between Deformation and Mass Transport in an Immiscible Alloy at High Shear Strains

Shear deformation of pure-Cu and Cu/Nb nano-laminates using micromechanical testing

Micro Defects Evolution of Nickel-Based Single Crystal Superalloys during Shear Deformation: A Molecular Dynamics Study

Ultra high-temperature deformation in a single crystal superalloy: Meso-scale process simulation and micro-mechanisms

Synergistic effects of temperature and strain rate on tensile properties of simulated Ni-6Cu alloy with Σ3 non-Arrhenius grain boundary

On the nature of nano twin-induced shear band formation in a dispersion strengthened copper alloy under micro-mechanical loading

On the Evolution of Nano-Structures at the Al–Cu Interface and the Influence of Annealing Temperature on the Interfacial Strength

Deformation Behavior, Microstructure Evolution, Phase Transformation and Plastic Instability Origin of Powder Metallurgy Al0.8Co0.5Cr1.5CuFeNi Alloy During High Temperature Deformation

Clarifying the Hot Shear-Compression Deformation Behavior of a Ni-Mo Superalloy: Flow Characteristic and Microstructure Evolution

Effect of Strain Rate and Temperature on Dynamic Mechanical Behavior and Microstructure Evolution of Ultra-High Strength Aluminum Alloy

Evolutionary mechanisms in the plastic deformation of γ'-Ni 3 (Al, Ti)-strengthened additively manufactured nickel-based 939 superalloys at intermediate temperatures

Extreme shear-deformation-induced modification of defect structures and hierarchical microstructure in an Al–Si alloy

The thermal instability mechanism and annealed deformation behavior of Cu/Nb nanolaminate composites

Dynamics and microstructural evolution of bulk amorphous Cu 12.5 Ni 10 Zr 41 Ti 14 Be 22.5 during phase separations: a small-angle neutron scattering approach

Deformation Micro-Twinning Arising at High Temperatures in a Ni-Co-based Superalloy

Strain heterogeneity and micro-damage nucleation under tensile stresses in an Mg-5Al-3Ca alloy with an intermetallic skeleton

In-situ EBSD study of deformation behavior of nickel-based superalloys during uniaxial tensile tests