Abstract:Temperature is known to affect deformation mechanisms in metallic alloys. As temperature decreases, the stacking-fault energy in many face-centered cubic (fcc) alloys decreases, resulting in a change of deformation mode from dislocation slip to deformation twinning. Such an impact of temperature can be more complex in compositionally heterogeneous microstructures that exhibit, for example, local concentration fluctuation such as that in multi-principal element alloys. In this work, we compare the dislocation behavior and mechanical properties of a fcc Cr20Mn10Fe30Co30Ni10 high-entropy alloy at ambient and liquid-nitrogen temperatures. We find that a network of stacking faults is formed by uniformly extended dislocations at ambient temperatures with low stacking-fault energy, whereas at lower temperatures, uneven dissociation of dislocations becomes significant, which results in severe dislocation pile-ups together with their pronounced entanglement. Our findings indicate that as the stacking-fault energy decreases with decreasing temperature, the heterogeneity of the distribution of elements becomes more dominant in tuning the local variation of lattice resistance. As a result, the change in dislocation behavior at low temperatures strongly affects microstructural evolution and consequently leads to significantly more pronounced work hardening.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the influence of temperature on the dislocation behavior in CrCoNi - based high - entropy alloys, especially the change of dislocation behavior at low temperatures and its influence on the microstructural evolution and work hardening of the materials. Specifically, through in - situ environment and low - temperature transmission electron microscopy techniques, the researchers compared the dislocation behavior and mechanical properties of Cr20Mn10Fe30Co30Ni10 high - entropy alloy at room temperature and liquid nitrogen temperature. ### Background and Problems of the Paper High - entropy alloys (HEAs), especially CrCoNi - based single - phase solid - solution alloys with a face - centered cubic (fcc) structure, have received extensive attention due to their excellent strength, ductility, and toughness. These properties are further enhanced at low temperatures. However, the specific influence of temperature on the dislocation behavior in these alloys is not fully understood. Especially in multi - principal - element alloys, due to the inhomogeneity of component distribution, such as local concentration fluctuations, the influence of temperature on dislocation behavior may be more complex. ### Main Findings 1. **Dislocation Behavior at Room Temperature**: - At room temperature, dislocations tend to dissociate into partial dislocations and form an extended stacking - fault network. These stacking - fault networks are formed by the interaction of dislocations on different slip planes, resulting in the obstruction of dislocation movement. - Under high strain, the interaction between dislocations increases, forming a stable dislocation network, which further hinders dislocation slip. 2. **Dislocation Behavior at Low Temperature**: - At low temperature, the dissociation width of dislocations is significantly reduced, and obvious local pinning phenomena occur. This leads to severe entanglement and accumulation of dislocations. - At low temperature, the non - uniform dissociation of dislocations and the nano - scale segment depinning phenomenon are significant, resulting in a more stable dislocation network, thereby significantly increasing the work hardening rate. ### Conclusions Temperature has a significant influence on the dislocation behavior in Cr20Mn10Fe30Co30Ni10 high - entropy alloy. As the temperature decreases, the dissociation width of dislocations decreases, the local pinning effect is enhanced, and the dislocation network becomes more stable, resulting in a higher work hardening rate. These findings indicate that the temperature dependence of dislocation behavior in multi - principal - element alloys is not only affected by the stacking - fault energy but also closely related to the inhomogeneity of local chemical distribution. This complex interaction has an important influence on the microstructural evolution and mechanical properties of materials. ### Formula Examples - The calculation formula for stacking - fault energy (Stacking Fault Energy, SFE): \[ \text{SFE} = \gamma_{\text{sf}} - \frac{1}{2} \gamma_{\text{usf}} \] where \(\gamma_{\text{sf}}\) is the stacking - fault energy and \(\gamma_{\text{usf}}\) is the stacking - fault energy of partial dislocations. - The relationship between the dislocation dissociation width \(b\) and the stacking - fault energy \(SFE\): \[ b = \sqrt{\frac{2 \mu b^2}{\pi SFE}} \] where \(\mu\) is the shear modulus and \(b\) is the length of the Burgers vector. These formulas and findings are helpful for understanding the influence of temperature on the dislocation behavior in high - entropy alloys and provide a theoretical basis for designing new alloys with excellent mechanical properties.

An in situ ambient and cryogenic transmission electron microscopy study of the effects of temperature on dislocation behavior in CrCoNi-based high-entropy alloys with low stacking-fault energy

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Real-time Nanoscale Observation of Deformation Mechanisms in CrCoNi-based Medium- to High-Entropy Alloys at Cryogenic Temperatures

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Temperature-dependent hardening contributions in CrFeCoNi high-entropy alloy

Temperature Effect on Stacking Fault Energy and Deformation Mechanisms in Titanium and Titanium-aluminium Alloy

Temperature dependence of compressive behavior and deformation microstructure of a Ni-based single crystal superalloy with low stacking fault energy

Cooperative deformation in high-entropy alloys at ultralow temperatures

Elucidating the transition of cryogenic deformation mechanism of CrMnFeCoNi high entropy alloy

Unveiling the Stacking Fault-Driven Phase Transition Delaying Cryogenic Fracture in Fe-Co-Cr-Ni-Mo-C-Based Medium-Entropy Alloy

Highly Pressurized Helium Nanobubbles Promote Stacking-Fault-mediated Deformation in FeNiCoCr High-Entropy Alloy

Molecular dynamics-based analysis of the effect of temperature and strain rate on deformation of nanocrystalline CoCrFeMnNi high-entropy alloy

Molecular dynamics study on the dislocation evolution mechanism of temperature effect in nano indentation of FeCoCrCuNi high-entropy alloy

Deformation Mechanisms of Al0.1CoCrFeNi at Elevated Temperatures

Dynamic recrystallization-induced temperature insensitivity of yield stress in single-crystal Al 1.2 CrFeCoNi micropillars

Generalized Stacking Fault Energy of Al-Doped CrMnFeCoNi High-Entropy Alloy

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

Copper effects on the microstructures and deformation mechanisms of CoCrFeNi high entropy alloys

Plastic deformation of FCC alloys at cryogenic temperature: the effect of stacking-fault energy on microstructure and tensile behaviour

Defect-induced inhomogeneous atomic environments in complex concentrated alloys

Unraveling the Deformation Behavior of the Fe45Co25Ni10V20 High Entropy Alloy