Abstract:The paper presents self-compacting concrete (SCC) performance at various replacements of steel fibers (ST) and polypropylene fibers (PP) using non-destructive testing (NDT). The NDT is a method of evaluating the properties of a material, component or system without causing damage. The NDT allows for evaluating the existing structures for strength and durability. The NDT performed in this research was ultrasonic pulse velocity (UPV), electrical resistivity (ER), and rebound hammer (RH), along with fresh properties and compressive strength. A total of six mixes were cast with a total of 1% fibers by volume. This 1% includes ST and PP in different proportions (0%, 0.25%, 0.5%, 0.75%, 1%) with a constant water-to-binder ratio of 0.45. The results show that the flow decreased as the percentage of fibers increased and reduced significantly when ST was 1%. The 28-day compressive strength was maximum in the hybrid mix when ST was 0.75% and PP was 0.25% compared to the control mix. ER was the minimum when ST was 1% by volume. The UPV of all SCC mixes decreased with the addition of fibers, and it was minimum when PP was 1% by volume. The 28-day RH was almost similar to compressive strength which shows the effectiveness of this test to evaluate the structures constructed with hybrid fiber-reinforced SCC. The research is significant as it evaluates the performance of hybrid fiber-reinforced SCC using non-destructive testing techniques. The results provide insight into the effects of different proportions of steel and polypropylene fibers on the flow properties and the correlation between the compressive strength and non-destructive testing parameters of SCC.

Combined Use of Non-Destructive Tests for Assessment of Strength of Concrete in Structure

A two stage procedure for assessment of in situ concrete strength using combined non-destructive testing

Experimental Study on the Compressive Strength of Big Mobility Concrete with Nondestructive Testing Method

Some Notes on Strength Testing of Shortage Structural Concrete with Ultrasonic-rebound Combined Method

Evaluation of performance of hybrid fiber-reinforced self-compacting concrete using non-destructive testing techniques

Estimation of compressive strength of concrete structures using the ultrasonic pulse velocity method and spectral analysis of surface wave method

Determination of engineering properties of cementitiously stabilised aggregates using ultrasonic pulse velocity

Mechanical and Microstructure Characterization of Fresh High- and Normal- Strength Concrete with Non-Contact Electrical Resistivity Measurement

Structural health monitoring: detection of concrete flaws using ultrasonic pulse velocity

Improving Non-Destructive Concrete Strength Tests Using Support Vector Machines

In-situ strength testing of high strength concrete

Prediction of compressive strength in sustainable concrete using regression analysis

Assessing the Spatial Variability of the Concrete by the Rebound Hammer Test and Compression Test of Drilled Cores

Ultrasonic Pulse Velocity to Assess the Fire Damage of Concrete

Study On Strength And Ultrasonic Velocity Of Air-Entrained Concrete And Plain Concrete In Cold Environment

Prediction of Ultrasonic Pulse Velocity for Cement, Mortar, and Concrete Through a Multiscale Homogenization Approach.

Estimation on Compressive Strength of In Situ Concrete with Innovative Pendulum Hammering Test Method

Non-destructive concrete strength evaluation using smart piezoelectric transducer—a comparative study

Evaluation of Condition of Concrete Structures Using Ultrasonic Pulse Velocity Method

Nondestructive Evaluation of Concrete Compressive Strength Using Shear-Horizontal Waves

Ultrasonic assessment of compressive strength of underwater concrete considering various mix parameters