Abstract:Compared with the conventional drainage strengthening techniques, the precast concrete segment assembly strengthening method (PCSAM) is regarded as a fast, more economical, and traffic-friendly underwater strengthening method for damaged bridge piers and piles, as the drainage procedure can be omitted. However, this method still has some disadvantages, such as strength loss of the filling material, debonding of the interface due to shrinkage of the filling material, poor connection effects, and poor durability of the segment sleeves. To solve these problems, the PCSAM is improved in this study by using self-stressed anti-washout concrete (SSAWC) as the filling material and by developing a lining concrete segment sleeve (LCSS) by referring to the design theory for shield lining segments. Six specimens are designed and prepared with consideration of the influential factors, such as the self-stress, thickness of the filled concrete, and concrete strength of the LCSS, then the monotonic axial compression test is carried out to investigate the improvements in the axial compression properties of the specimens. Accordingly, extended parametric analyses are performed based on the established numerical models. Finally, the calculation formula for the bearing capacity is proposed based on the analysis results. The results indicate that the SSAWC can provide initial confining compressive stress in the core region of the piers, in addition to increasing the bearing capacity and ductility of the specimens. The improved LCSS segment connection is more reliable and increases the strengthening efficiency. The influence of self-stress on the bearing capacity of the specimens is cubic and the influence of the filled concrete strength on the bearing capacity of the specimens is nonlinear. The calculation formula for predicting the bearing capacity of axially compressed columns possesses good applicability and can be used as a reference for practical engineering.

Ultrasonic assessment of compressive strength of underwater concrete considering various mix parameters

Interactive Influence of Water and Fines Contents on the Strength of Compacted Cement-Stabilized Clayey Sands: Insights and Predictive Framework

Prediction of Ultrasonic Pulse Velocity for Cement, Mortar, and Concrete Through a Multiscale Homogenization Approach.

Strength evaluation of a new underwater concrete type

Impact of Water–Cement Ratio on Concrete Mechanical Performance: Insights into Energy Evolution and Ultrasonic Wave Velocity

Estimation of compressive strength of concrete structures using the ultrasonic pulse velocity method and spectral analysis of surface wave method

Influence of Water Currents Velocity on the Strength of a New Underwater Concrete Approach

Measurement of Permeability and the Correlation Between Permeability and Strength of Pervious Concrete

Strength gain monitoring and construction quality evaluation on non-dispersible underwater concrete using PZT sensors

An Orthogonal Test Study on the Preparation of Self-Compacting Underwater Non-Dispersible Concrete

Ultrasonic computed tomography-based internal-defect detection and location of underwater concrete piers

A New Test Method to Simulate Chloride Penetration into Concrete in Tidal Zone

Behavior of Concrete in Water Subjected to Dynamic Triaxial Compression

The Mix Ratio Study of Self-Stressed Anti-Washout Underwater Concrete Used in Nondrainage Strengthening

Study on Underwater Anti-washout Concrete in Sediment Environment for Offshore Engineering

Multiscale insights on compression cast sea sand and seawater concrete

Experimental Study on the Axial Compression Performance of an Underwater Concrete Pier Strengthened by Self-Stressed Anti-Washout Concrete and Segments

Study on wave velocity characteristics and compressive strength of concrete under different water pressure

An acousto-ultrasonic approach for the determination of water-to-cement ratio in concrete

Study of the influence of seawater and sea sand on the mechanical and microstructural properties of concrete

Damage Evaluation of Concrete under Uniaxial Compression Based on the Stress Dependence of AE Elastic Wave Velocity Combined with DIC Technology