Abstract:Pervious concrete is a type of sustainable construction material used in pavement engineering due to its advantages in water permeability, skid resistance, and sound absorption performance. This study investigated the pore characteristics of five types of pervious concrete, along with the uniaxial compression behaviors and semi-circular bending (SCB) fracture performance. The critical stress intensity factor was obtained using the equivalent energy approach. Gray relational analysis was conducted between the mechanical performance and the pore characteristics. Pore indicators include the effective porosity, 2D porosity along the specimen height, 2D coordination number (CN) along the specimen height, 2D pore radius, 2D specific surface area, 3D CN, 3D pore radius, and 3D virtual porosity. Results indicated that from M1 to M3, when cement mortar content decreased from 520 kg/m(3) to 408 kg/m(3), the effective porosity increased from 18.95% to 27.43%, and the compressive strength and fracture toughness decreased obviously. For the same type of pervious concrete mixture, with the increase of notch length, the critical stress intensity factor decreased accordingly. The 2D porosity distribution, 2D pore size distribution, and 2D CN distribution presented a symmetrical trend of decreasing, then increasing, and then decreasing with the increase of specimen height. Aggregate with the gradation within the range of 9.5 mm to 19.0 mm generated a higher compressive strength, larger effective porosity and larger pore size compared to the gradation of 4.75 mm similar to 9.5 mm. The results of CN and pore radius generated from the 3D pore network model were larger than the corresponding 2D values. The gray correlation analysis revealed that 2D pore radius and 3D pore radius played critical effects on the uniaxial compressive strength and fracture resistance, while 2D CN and 3D CN were the least significant factors affecting the mechanical performance.

Measurement of Permeability and the Correlation Between Permeability and Strength of Pervious Concrete

Research on the strength prediction for pervious concrete based on design porosity and water-to-cement ratio

Experimental Study on Mechanical Properties of Permeable Concrete

Gray Correlation Analysis Between Mechanical Performance and Pore Characteristics of Permeable Concrete

Evaluation of pore size distribution and permeability reduction behavior in pervious concrete

Correlations among physical properties of pervious concrete with different aggregate sizes and mix proportions

Mixture proportion design of pervious concrete based on the relationships between fundamental properties and skeleton structures

Enhancing both strength and permeability of pervious concrete by optimizing pore structure: An experimental study

Research on Physical Properties and Durability of Pervious Cement Concrete

The Experimental Study on the Porous Concrete

A novel approach to evaluate the clogging resistance of pervious concrete

Influence of Pore Structure Characteristics on the Mechanical and Durability Behavior of Pervious Concrete Material Based on Image Analysis

Study on Relation Between Early-age Performance of Concrete and Its Durability

Correlation of Mechanical and Microstructure Development of Early-Age Concrete by Electrical Resistivity Measurement

Changes of strength characteristics of pervious concrete due to variations in water to cement ratio

Investigation of Compaction on Compressive Strength and Porosity of Pervious Concrete

Quantitative study on the influence of fly ash content, saturation degree and interface transition zone on the permeability of cement-based materials

Microscopic Factors Affecting the Performance of Pervious Concrete

Laboratory Experiment: Pervious Concrete for Permeable Pavement, Focus in Compressive Strength and Permeability

Fractal Dimension of Concrete Incorporating Silica Fume and Its Correlations to Pore Structure, Strength and Permeability