Abstract:The incorporation of supplementary cementitious materials (SCMs) in concrete can improve the properties of concrete partially immersed in salt solution. However, the current partial immersion environment only considers the capillary action above the still water level, does not consider the capillary action above the fluctuating water level in dry-wet cycling environment. In this paper, a series of indoor exposure experiments were carried out to investigate the effects of incorporating polynary SCMs including fly ash (FA), ground granulated blast furnace slag (GGBFS) and silica fume (SF) on the sulfate resistance and chloride impermeability of concrete considering the capillary action above the fluctuating water level in dry-wet cycling environment. A total of 15 groups of concrete with different mix proportions (total 150 concrete specimens) were designed to study the effects of different replacement levels of polynary SCMs on concrete properties. The effects of incorporating polynary SCMs on the chloride impermeability of concrete above and in the fluctuating water level zone were investigated. The scanning electron microscope (SEM), x-ray diffraction (XRD) and mercury intrusion porosimetry (MIP) tests were used to analyze the microstructure of concrete. The results indicate that when concrete is incorporated with polynary SCMs and subjected to capillary action above the fluctuating water level, the compressive strength and chloride impermeability first increase and then decrease with the increase of FA content; the compressive strength and chloride impermeability decrease with the increase of GGBFS content; the compressive strength first increase and then decrease with the increase of SF content, and the chloride impermeability increase with that. The transport process of chloride in concrete above the fluctuating water level zone includes the longitudinal transport under capillary action and the transverse transport under concentration gradient action. The combined effects of both cause the higher chloride concentration in concrete above the fluctuating water level zone. Comprehensively considering the influence of different mix proportions on the sulfate resistance and chloride impermeability of concrete, it is determined that 20% FA + 5% SF is the optimal replacement level with the excellent performance considering the capillary action above the fluctuating water level in dry-wet cycling environment.

Influence of Water Currents Velocity on the Strength of a New Underwater Concrete Approach

Interactive Influence of Water and Fines Contents on the Strength of Compacted Cement-Stabilized Clayey Sands: Insights and Predictive Framework

Strength evaluation of a new underwater concrete type

Washout Resistance of Self-Protected Underwater Concrete in Freshwater and Seawater

Simulation of underwater concrete movement in flowing water using DEM-CFD coupling method

The Mix Ratio Study of Self-Stressed Anti-Washout Underwater Concrete Used in Nondrainage Strengthening

Effects of incorporating polynary SCMs on sulfate resistance and chloride impermeability of concrete considering capillary action in dry-wet cycling environment

Influence of Seawater and Sea Sand on the Performance of Anti-Washout Underwater Concrete: The Overlooked Significance of Mg2+

Study of the influence of seawater and sea sand on the mechanical and microstructural properties of concrete

Ultrasonic assessment of compressive strength of underwater concrete considering various mix parameters

Uncovering the role of superplasticizer in developing nano-engineered ultra-high-performance concrete

Developing a Sustainable Ultrahigh-Performance Concrete Using Seawater and Sea Sand in Combination with Superfine Stainless Wires

Comparative Study of the Performance of Underwater Concrete between Anionic and Nonionic Anti-Washout Admixtures

Study on Underwater Anti-washout Concrete in Sediment Environment for Offshore Engineering

Strength gain monitoring and construction quality evaluation on non-dispersible underwater concrete using PZT sensors

Experimental Study on the Axial Compression Performance of an Underwater Concrete Pier Strengthened by Self-Stressed Anti-Washout Concrete and Segments

Enhancing Marine Anti-Washout Concrete: Optimal Silica Fume Usage for Improved Compressive Strength and Abrasion Resistance

EFFECT OF HYDROSTATIC WATER PRESSURE ON PERFORMANCE OF SELF-COMPACTING CONCRETE PLACED UNDERWATER

An Orthogonal Test Study on the Preparation of Self-Compacting Underwater Non-Dispersible Concrete

A review on ultra-high performance seawater sea sand concrete: Hydration, microstructure and properties

Water-Resistance Performance Analysis of Portland Composite Concrete Containing Waterproofing Liquid Membrane