Abstract:Owing to their excellent mechanical, electrical, thermal, electromagnetic characteristics, micro diameter and high aspect ratio, super-fine stainless wires (SSWs) can form widely-distributed reinforcing and conductive network in ultra-high performance concrete (UHPC) at low dosage, thus endowing UHPC with multifunctional properties including enhanced mechanical performances and durability as well as smart property. In this paper, the mechanical, electrically conductive, and self-sensing performances of SSWs reinforced UHPC were investigated. The modification mechanisms of SSWs to UHPC were revealed by microstructure, electrochemical impedance spectroscopy and intrinsically electrical conductivity analysis. The results show that the 1.5 vol. % of SSWs can increase the flexural strength, flexural toughness of UHPC unnotched beams and equivalent flexural strength of UHPC notched beams by 103.2%, 146.5% and 80.0% respectively. Meanwhile, the dynamic impact toughness and dissipate energy of SSWs reinforced UHPC with the strain rate ranging from 94 /s to 926 /s are increased by 43.5% and 58.2%, respectively. The electrical resistivity is reduced by six orders of magnitudes and the electrochemical impedance spectroscopy only shows small flat arcs in the first quadrant in UHPC containing 0.5 vol.% of SSWs in diameter of 20 μm. The gauge factor of UHPC reinforced with SSWs in diameter of 8 μm can reach up to 22.5, 94.9 and 43.6 under cyclic compression, monotonic compression and flexure, respectively. The microstructure analysis indicates that the modification effect of SSWs on UHPC results from the extensive network of SSWs in UHPC, the inhibition on micro-cracks propagation and the pull-out and stripping of SSWs under loading. SSWs reinforced UHPC has great potential for developing pre-cast structural elements or cast-in-place joints for prefabricated structures, which will achieve the monitoring for structural key positions and can be efficiently used for health monitoring and safety assessment of prefabricated structures driven by the sensing information of multifunctional concrete. This will further avoid the issue concerning high cost of large scale application of multifunctional concrete. In addition, the smart pre-cast structural elements can be reusable and replaceable. Therefore, developing SSWs reinforced UHPC for prefabricated structures can make infrastructures safer, more durable and sustainable.

Developing a Sustainable Ultrahigh-Performance Concrete Using Seawater and Sea Sand in Combination with Superfine Stainless Wires

Sulphate Corrosion Mechanism of Ultra-High-Performance Concrete (UHPC) Prepared with Seawater and Sea Sand

Feasibility Study on Preparing Economical and Environmentally-Friendly High-Flowability Ultra-High Performance Cementitious Composites with Original Graded Stone Powder Free Recycled Manufactured Sands

Seismic Performance Of Seawater And Sea Sand Concrete-Filled Ultra-High Performance Concrete Tubes Under Low-Cycle Reversed Lateral Loading

A review on ultra-high performance seawater sea sand concrete: Hydration, microstructure and properties

Strength, hydration, and microstructure of seawater sea-sand concrete using high-ferrite Portland cement

Axial Compressive Behavior and Load Carrying Capacity Prediction of Prefabricated UHPC Tube Filled with Seawater Sea-Sand Coral Aggregate Concrete

Utilization of Solid Waste from Tunnel Excavation As Manufactured Sand with Different Lithology and Pre-Washing Process for Preparation of Eco-Friendly Ultra-High Performance Concretes: Properties and Microstructural Analysis

Mechanical properties of multi-scale mono/hybrid non-metallic fiber-reinforced ultra-high performance seawater sea-sand concrete

Sustainable ultra-high performance concrete with incorporating mineral admixtures: Workability, mechanical property and durability under freeze-thaw cycles

Sulfate Resistance of Eco-Friendly and Sulfate-Resistant Concrete Using Seawater Sea-Sand and High-Ferrite Portland Cement

The Mechanism of Anticorrosion Performance and Mechanical Property Differences between Seawater Sea-Sand and Freshwater River-Sand Ultra-High-Performance Polymer Cement Mortar (UHPC)

Mechanical properties and hydration of ultra-high-performance seawater sea-sand concrete (UHPSSC) with limestone calcined clay cement (LC3)

Workability, strength, and shrinkage of ultra-high-performance seawater, sea sand concrete with different OPC replacement ratios

Mechanical performance and structural application of a novel basalt‐fiber‐reinforced ultra‐high‐performance seawater‐sea‐sand concrete (UHPSSC) with basalt coarse aggregate

Developing Multifunctional Ultra-High Performance Concrete via Incorporating Hybrid Steel Wires and Fibers

Efficient Utilization of Waste Marine Clay for Fine Aggregate to Develop Sustainable and Cost-Effective Strain-Hardening Cement-Based Composites

Multifunctional Super-Fine Stainless Wires Reinforced UHPC for Smart Prefabricated Structures

Research on the performance of seawater sea-sand concrete: A review

Design and assessment of eco-friendly ultra-high performance concrete with steel slag powder and recycled glass powder

Durability and mechanism of high-salt resistance concrete exposed to sewage-contaminated seawater