Abstract:Ultra-high-performance seawater sea-sand concrete (UHPSSC) has attracted increasing attentions over the past few years as it exhibits exceptional mechanical and durability properties similar to conventional ultra-high-performance concrete (UHPC). Comparing to conventional UHPC, UHPSSC has great advantages when applied in marine engineering, particularly in offshore projects where construction materials are not easily accessible, and the transportation is costly. Nonetheless, current production of UHPSSC still necessitates large amounts of cement due to its low water/binder ratio. The larger demands of cement in manufacturing UHPSSC/UHPC than ordinary concrete can lead to substantial increase in the carbon emission. Therefore, an eco-friendly UHPSSC is developed in this paper by incorporating a promising ternary binder system (LC3) that consists of limestone (LS), calcined clay (metakaolin) and cement. The influence of the metakaolin (MK) dosage on the mechanical, hydration and microstructure properties of UHPSSC is comprehensively studied by carrying out a variety of experiments including mechanical test, isothermal conduction calorimetry test, TGA, XRD, SEM etc. The results showed that the UHPSSC mixed with LC3 exhibited lower early-age compressive strength than the reference mix, but its long-term strength was better than the reference group owing to the formation of more hydrates at the late age by the pozzolanic reaction of MK and the synergistic reaction between LS, MK and cement. Based on this study, the coupled replacement rate of cement by LS and MK could reach up to 40% without strength compromise. Nonetheless, 20% MK and 10% LS appeared to be the optimum substitution rate (total substitution rate of 30%) where the highest long-term strength was achieved. The main exothermic peak and total heat of hydration normalized per binder weight decreased with the increase of MK content level, but the main peak occurred earlier. Moreover, the addition of seawater can promote the hydration, leading to a greater main exothermic peak.

Efficient Utilization of Waste Marine Clay for Fine Aggregate to Develop Sustainable and Cost-Effective Strain-Hardening Cement-Based Composites

Development of Sustainable Self-Compacting Concrete Using Recycled Concrete Aggregate and Fly Ash, Slag, Silica Fume

Feasibility Study on Preparing Economical and Environmentally-Friendly High-Flowability Ultra-High Performance Cementitious Composites with Original Graded Stone Powder Free Recycled Manufactured Sands

Recycling Stone Powder As a Partial Substitute for Cementitious Materials into Eco-Friendly Manufactured Sand Ultra-High Performance Concretes: Towards Cleaner and More Cost-Effective Construction Production

Simultaneous Enhancement of Ductility and Sustainability of High-Strength Strain-Hardening Cementitious Composites (SHCC) Using Recycled Fine Aggregates

Hydration mechanism and mechanical properties of a developed low-carbon and lightweight strain-hardening cementitious composites

Greener strain-hardening cementitious composites (SHCC) with a novel alkali-activated cement

Feasibility of Using the Hollow Glass Microsphere to Develop Lightweight CAC-GGBFS-Blended Strain-Hardening Cementitious Composites

Research on Sustainable Development of Fine-Grained Material Cement Slurry

Microstructural and mechanical properties of marine clay cemented with industrial waste residue-based binder (IWRB)

Conjoint Reuse of Ceramic Polishing Waste and Calcium Carbide Slag As Mineral Admixtures: Hydration and Mechanical Properties

Chloride diffusion and binding capacity of sustainable cementitious materials with construction waste powder as cement replacement

Synergistic effect of recycling waste coconut shell ash, metakaolin, and calcined clay as supplementary cementitious material on hardened properties and embodied carbon of high strength concrete

Using Eco-Friendly Recycled Powder from CDW to Prepare Strain Hardening Cementitious Composites (SHCC) and Properties Determination

Mechanical properties and hydration of ultra-high-performance seawater sea-sand concrete (UHPSSC) with limestone calcined clay cement (LC3)

Assessment of mechanical and heavy metal leaching behavior of resource-efficient engineered cementitious composites incorporating ultra-high-volume municipal waste incineration bottom ash

Sustainable Utilization of Waste Oyster Shell Powders with Different Fineness Levels in a Ternary Supplementary Cementitious Material System

Evaluation of the Performance of Low-Cement Strain-Hardening Cementitious Composites Containing Desert Sand and Ground Scoria Rocks

High ductility cementitious composites incorporating seawater and coral sand (SCS-HDCC) for offshore engineering: Microstructure, mechanical performance and sustainability

Utilization of waste marine dredged clay in preparing controlled low strength materials with polycarboxylate superplasticizer and ground granulated blast furnace slag

Reusing Ceramic Waste as a Fine Aggregate and Supplemental Cementitious Material in the Manufacture of Sustainable Concrete