Abstract:Introducing nanotechnology in concrete is one of the most significant successes in enhancing the mechanical properties of concrete. It affects the quality of the microstructure of the concrete due to its extremely small nanoparticles leading to a faster reaction due to its large surface area. The nanoparticles fill the concrete's pores, resulting in considerably improved strengths in the early ages of the concrete. This research used six models; linear regression (LR), multilinear regression (MLR), nonlinear regression (NLR), pure quadratic (PQ), interaction (IA), and full quadratic (FQ), to predict the compressive strength of the concrete modified with different Nanosilica contents for various mix proportions. The models were applied to three datasets, with 420 collected from several research studies. The ranges of the concrete mix proportions used in this study were as follows, water/cement ratio (w/c) ranged between 0.1 and 1, cement content (C) ranged between 153.81 and 1200 kg/m3, fine aggregate content (FA) ranged between 492 and 2270 kg/m3, coarse aggregate content (CA) ranged between 617 and 2900 kg/m3, superplasticizer (SP) ranged between 0% and 6.7%, coarse aggregate size (CAS) ranged between 6 and 50.8 mm, fine aggregate size (FAS) ranged between 0.025 and 10 mm, Nanosilica content (NS%) ranged between 0% and 15%, w/c of 0.4–0.6 and the curing time (days) ranged between 3 and 180. The compressive strength of the collected datasets ranged from 3 to 120 MPa. The parameters that have improved the analyzed datasets of the compressive strength were the content of Nanosilica and the SP. The models were assessed for their accuracy using multiple assessment criteria; the most evident ones are; the objective function (OBJ), root mean square error (RMSE), Scatter Index (SI), and the maximum absolute error (MAE). The analytical models and the model comparison operations will be shown in detail in this research, indicating that the most effective and accurate model is the FQ model; where coefficient of determination (R2) of 0.96, RMSE of 3.49 MPa, MAE of 2.96 MPa, and SI of 0.08 were conducted from the analytical studies. From the developed models, the compressive strength of the concrete up to a high compressive strength level with high accurately can be predicted. Also, the compressive strength of the concrete can be accurately predicted for various sizes of aggregate and specimens.

Mechanical Properties of Concrete Produced with Coarse Aggregates from Different Mineralogical Origins Using Ultrasonic Tests

Prediction of Ultrasonic Pulse Velocity for Cement, Mortar, and Concrete Through a Multiscale Homogenization Approach.

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

Simulations of ultrasonic wave propagation in concrete based on a two-dimensional numerical model validated analytically and experimentally

Study of the Healing Effect of Concrete with Supplementary Cementitious Materials after Early-Age Damage by Acoustic Emission Technique

Empirical Relationships for Prediction of Mechanical Properties of High-Strength Concrete

Determination of engineering properties of cementitiously stabilised aggregates using ultrasonic pulse velocity

Relationships Between Physical, Mechanical and Acoustic Properties of Asphalt Mixtures Using Ultrasonic Testing

Statistical Reliability Analysis of Ultrasonic Velocity Method for Predicting Residual Strength of High-Strength Concrete under High-Temperature Conditions

Mechanical and Microstructure Characterization of Fresh High- and Normal- Strength Concrete with Non-Contact Electrical Resistivity Measurement

Impact of Water–Cement Ratio on Concrete Mechanical Performance: Insights into Energy Evolution and Ultrasonic Wave Velocity

Analysis and prediction of the effect of Nanosilica on the compressive strength of concrete with different mix proportions and specimen sizes using various numerical approaches

Experimental and Statistical Evaluation of the Interaction Effect of Recycled Aggregate and Water/Cement Ratio on Concrete Compressive Strength

Prediction of compressive strength in sustainable concrete using regression analysis

Ultrasonic assessment of compressive strength of underwater concrete considering various mix parameters

Application of Support Vector Machine and Finite Element Method to predict the mechanical properties of concrete

Static Mechanical Properties and Microscopic Analysis of Hybrid Fiber Reinforced Ultra-High Performance Concrete with Coarse Aggregate

Experimental Investigation and Image Processing to Predict the Properties of Concrete with the Addition of Nano Silica and Rice Husk Ash

Investigation of Self-Compacting Concrete Behavior under Axial Load by Acoustic Emission Method

Influence of Environmental Factors and Aggregates on Concrete Elasticity: Ultrasonic and Strength Testing

Prediction of Mechanical Properties of High-Performance Concrete (HPC) Reinforced with Steel Fibers