Abstract:Introducing nanotechnology in concrete is one of the most significant successes in enhancing the mechanical properties of concrete. It affects the quality of the microstructure of the concrete due to its extremely small nanoparticles leading to a faster reaction due to its large surface area. The nanoparticles fill the concrete's pores, resulting in considerably improved strengths in the early ages of the concrete. This research used six models; linear regression (LR), multilinear regression (MLR), nonlinear regression (NLR), pure quadratic (PQ), interaction (IA), and full quadratic (FQ), to predict the compressive strength of the concrete modified with different Nanosilica contents for various mix proportions. The models were applied to three datasets, with 420 collected from several research studies. The ranges of the concrete mix proportions used in this study were as follows, water/cement ratio (w/c) ranged between 0.1 and 1, cement content (C) ranged between 153.81 and 1200 kg/m3, fine aggregate content (FA) ranged between 492 and 2270 kg/m3, coarse aggregate content (CA) ranged between 617 and 2900 kg/m3, superplasticizer (SP) ranged between 0% and 6.7%, coarse aggregate size (CAS) ranged between 6 and 50.8 mm, fine aggregate size (FAS) ranged between 0.025 and 10 mm, Nanosilica content (NS%) ranged between 0% and 15%, w/c of 0.4–0.6 and the curing time (days) ranged between 3 and 180. The compressive strength of the collected datasets ranged from 3 to 120 MPa. The parameters that have improved the analyzed datasets of the compressive strength were the content of Nanosilica and the SP. The models were assessed for their accuracy using multiple assessment criteria; the most evident ones are; the objective function (OBJ), root mean square error (RMSE), Scatter Index (SI), and the maximum absolute error (MAE). The analytical models and the model comparison operations will be shown in detail in this research, indicating that the most effective and accurate model is the FQ model; where coefficient of determination (R2) of 0.96, RMSE of 3.49 MPa, MAE of 2.96 MPa, and SI of 0.08 were conducted from the analytical studies. From the developed models, the compressive strength of the concrete up to a high compressive strength level with high accurately can be predicted. Also, the compressive strength of the concrete can be accurately predicted for various sizes of aggregate and specimens.

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

Experimental Study on Some Factors Affecting Fracture Property of Concrete

Experimental Study on the Fracture Toughness of Concrete under Different Curing Conditions

Fracture Toughness And Microstructure Of Concrete At Early-Ages

Experimental study on fracture properties of self-compacting concrete

Influence of Mineral Admixture on Early-Age Concrete Cracking

Effect of Silica Fume in Concrete on Mechanical Properties and Dynamic Behaviors under Impact Loading

Study on compressive mechanical properties of recycled aggregate concrete with silica fume at different strain rates

EFFECT OF COARSE/FINE AGGREGATE RATIO AND CEMENT MATRIX STRENGTH ON FRACTURE PARAMETERS OF CONCRETE

Experimental study, modeling, and reliability analysis of impact resistance of micro steel fiber‐reinforced concrete modified with nano silica

Experimental Investigation on Initial Cracking Criterion and Size Effect for I-II Mixed Mode Fracture in Concrete

Analysis and prediction of the effect of Nanosilica on the compressive strength of concrete with different mix proportions and specimen sizes using various numerical approaches

Effect of Aggregate Type on Mechanical Behavior of Dam Concrete

Using digital image correlation to evaluate fracture toughness and crack propagation in the mode I testing of concretes involving fly ash and synthetic nano-SiO 2

Effect of coarse aggregate content on fracture parameters of concrete

Effect of Coarse Aggregate Type on the Fracture Toughness of Ordinary Concrete

Effect of Different Fine Aggregate Characteristics on Fracture Toughness and Microstructure of Sand Concrete

Effect of Fine Aggregate Type on Early-Age Performance, Cracking Analysis and Engineering Applications of C50 Concrete

3D Mesoscale Study on the Effect of ITZ and Aggregate Properties on the Fracture Behaviors of Concrete Based on Discrete Element Method

Failure criteria and microstructure evolution mechanism of the alkali–silica reaction of concrete

Effect of coarse aggregate size on non-uniform stress/strain and drying-induced microcracking in concrete