Abstract:This research work aims to compare the strength and fracture mechanics properties of plain concretes, obtained from different coarse aggregates. During the study, mechanical parameters including compressive strength (fcm) and splitting tensile strength (fctm), as well as fracture parameters involving critical stress intensity factor (KIcS) and critical crack tip opening displacement (CTODc) were evaluated. The effect of the aggregates used on the brittleness of the concretes was also analyzed. For better understanding of the crack initiation and propagation in concretes with different coarse aggregates, a macroscopic failure surfaces examination of the tested beams is also presented. Crushed aggregates covered were basalt (BA), granite (GT), and limestone (LM), and natural peeble gravel aggregate (GL) were used in the concrete mixtures. Fracture toughness tests were performed on an MTS 810 testing machine. Due to the high strength of the rock material, the rough surface of the aggregate grains, and good bonding in the ITZ area between the aggregate and the paste, the concretes with crushed aggregates exhibited high fracture toughness. Both of the analyzed fracture mechanics parameters, i.e., KIcS and CTODc, increased significantly in the case of concretes which were manufactured with crushed aggregates. They amounted, in comparison to concrete based on gravel aggregate, to levels ranging from 20% for concrete with limestone aggregate to over 30% for concrete with a granite aggregate, and to as much as over 70% for concrete with basalt aggregate. On the other hand, the concrete with gravel aggregate showed the lowest fracture toughness because of the smooth surface of the aggregate grains and poor bonding between the aggregate and the cement paste. However, the fracture process in each series of concrete was quasi-plastic in the case of gravel concrete, semi-brittle in the case of limestone concrete, and clearly brittle in the case of the concretes based on granite and basalt aggregates. The results obtained help to explain how the coarse aggregate type affects the strength parameters and fracture toughness at bending.

Effect of coarse aggregate content on fracture parameters of concrete

Effect of Forepart Strength of Cured-concrete

EFFECT OF COARSE/FINE AGGREGATE RATIO AND CEMENT MATRIX STRENGTH ON FRACTURE PARAMETERS OF CONCRETE

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

Experimental Study on Some Factors Affecting Fracture Property of Concrete

Effect of Aggregate on Cracking Behaviours of Concrete in Mesoscopic Modeling

Effect of coarse aggregate size distribution on fracture toughness of concrete based on boundary effect model

Influence of Mineral Admixture on Early-Age Concrete Cracking

Influence of coarse aggregate size and cement matrix strength on stress–crack width relationship of concrete

Effect of Aggregate Type on Mechanical Behavior of Dam Concrete

Fracture Toughness And Microstructure Of Concrete At Early-Ages

Effect of Coarse Aggregate Type on the Fracture Toughness of Ordinary Concrete

Evaluation of Fracture Parameters of Concrete from Bending Test Using Inverse Analysis Approach

Effect of Volume Fraction of Coarse Aggregate on Elastic Modulus and Compressive Strength of Concrete

Effect of coarse‐aggregate shape on strength of hydraulic concrete

Experimental study on fracture properties of self-compacting concrete

Influence of Coarse Aggregate Type on the Mechanical Strengths and Durability of Cement Concrete

Effect of coarse aggregate size distribution on concrete strength development process

Effect of Different Fine Aggregate Characteristics on Fracture Toughness and Microstructure of Sand Concrete

Effect of coarse aggregate size on non-uniform stress/strain and drying-induced microcracking in concrete

Fracture performance of concrete incorporating different levels of recycled coarse aggregate