Abstract:Cementitious materials, mainly in the form of concrete, belong to a class of macroscopically heterogeneous materials. The building technology of mass concrete structures enables large-sized coarse aggregate to be used. The maximum coarse aggregate size, in conjunction with the mechanical properties of the interfacial transition zone (ITZ), have great influences on the mesoscopic crack path and the macroscopic mechanical behavior of concrete. Herein this study, based on some pioneering work (Stroeven, 2000; Rossello and Elices, 2004, Rossello et al., 2006; Elices and Rocco, 2008), the effects of varying the maximum coarse aggregate size and the ITZ strength on the global mechanical properties of concrete in direct tension are theoretically modelled from a mesoscopic point of view. The particle size effect behavior of concrete is analyzed based on the proposed theoretical method, and some general conclusions can be drawn as: (1) The degree of tortuosity of the mesoscopic crack path in direct tension increases with increasing maximum coarse aggregate size and with decreasing ITZ strength; (2) The fracture energy and the tensile strength of concrete increase dramatically with increasing ITZ strength; (3) For normal strength concrete, the fracture energy and the tensile strength decrease with increasing maximum coarse aggregate size, while for relatively high strength concrete, the trends are the opposite; (4) The properties of ITZ could significantly affect the homogeneity of concrete. High quality ITZ could make the mechanical properties of concrete more homogeneous and get a relatively high strength concrete, consequently a short characteristic length and a high brittleness number are resulted; (5) For normal strength concrete, the characteristic length increases with increasing maximum coarse aggregate size, while for relatively high strength concrete, it is fairly insensitive to the maximum coarse aggregate size. It is hoped that this theoretical method may be helpful in the study of size effect and in the design of concrete and future cementitious materials.

Influence of coarse aggregate size and cement matrix strength on stress–crack width relationship of concrete

EFFECT OF COARSE/FINE AGGREGATE RATIO AND CEMENT MATRIX STRENGTH ON FRACTURE PARAMETERS OF CONCRETE

Effect of Aggregate on Cracking Behaviours of Concrete in Mesoscopic Modeling

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

Influence of Steel Reinforcement on Shrinkge Stress of Concrete

Evaluation of Fracture Parameters of Concrete from Bending Test Using Inverse Analysis Approach

Experimental Study on Some Factors Affecting Fracture Property of Concrete

Effect of coarse aggregate size on non-uniform stress/strain and drying-induced microcracking in concrete

Effect of coarse aggregate content on fracture parameters of concrete

INFLUENCE OF CRACKING WIDTH TO CONCRETE DURABILITY

Effect of coarse aggregate size distribution on fracture toughness of concrete based on boundary effect model

A Theoretical Method to Determine the Tortuous Crack Length and the Mechanical Parameters of Concrete in Direct Tension—a Particle Size Effect Analysis

Mechanical properties and numerical simulation of crack interface in reinforced concrete

Mesoscopic modeling and simulation of tensile properties of cracked concrete using cohesive model

Effect of Reinforcement Size on Concrete Crack Width with the Same Reinforcement Ratio

Effect of Aggregate Type on Mechanical Behavior of Dam Concrete

Influence of Flexural Loading on Chloride Ingress in Concrete Subjected to Cyclic Drying-Wetting Condition

Numerical Analysis for Crack Width of Reinforced Concrete Beam with Bond-Slip Effect

Influence of coarse aggregate and steel fiber on crack propagation pattern in concrete

Crack shape and rust distribution in corrosion-induced cracking concrete coupled with load

Effect of coarse‐aggregate shape on strength of hydraulic concrete