Abstract:Cementitious materials, mainly in the form of concrete, belong to a class of macroscopically heterogeneous materials. The building technology of mass concrete structures enables large-sized coarse aggregate to be used. The maximum coarse aggregate size, in conjunction with the mechanical properties of the interfacial transition zone (ITZ), have great influences on the mesoscopic crack path and the macroscopic mechanical behavior of concrete. Herein this study, based on some pioneering work (Stroeven, 2000; Rossello and Elices, 2004, Rossello et al., 2006; Elices and Rocco, 2008), the effects of varying the maximum coarse aggregate size and the ITZ strength on the global mechanical properties of concrete in direct tension are theoretically modelled from a mesoscopic point of view. The particle size effect behavior of concrete is analyzed based on the proposed theoretical method, and some general conclusions can be drawn as: (1) The degree of tortuosity of the mesoscopic crack path in direct tension increases with increasing maximum coarse aggregate size and with decreasing ITZ strength; (2) The fracture energy and the tensile strength of concrete increase dramatically with increasing ITZ strength; (3) For normal strength concrete, the fracture energy and the tensile strength decrease with increasing maximum coarse aggregate size, while for relatively high strength concrete, the trends are the opposite; (4) The properties of ITZ could significantly affect the homogeneity of concrete. High quality ITZ could make the mechanical properties of concrete more homogeneous and get a relatively high strength concrete, consequently a short characteristic length and a high brittleness number are resulted; (5) For normal strength concrete, the characteristic length increases with increasing maximum coarse aggregate size, while for relatively high strength concrete, it is fairly insensitive to the maximum coarse aggregate size. It is hoped that this theoretical method may be helpful in the study of size effect and in the design of concrete and future cementitious materials.

Effect of Reinforcement Size on Concrete Crack Width with the Same Reinforcement Ratio

Bond Strength Evaluation of Corroded Steel Bars Via the Surface Crack Width Induced by Reinforcement Corrosion

Numerical Analysis for Crack Width of Reinforced Concrete Beam with Bond-Slip Effect

Effect of Aggregate on Cracking Behaviours of Concrete in Mesoscopic Modeling

INFLUENCE OF CRACKING WIDTH TO CONCRETE DURABILITY

Prediction of Corrosion-Induced Crack Width of Corroded Reinforced Concrete Structures

The Effect of Crack Width on Chloride-Induced Corrosion of Steel in Concrete

Crack Width Calculation Methods Of Reinforced Concrete Beidges And Application

Influence of coarse aggregate size and cement matrix strength on stress–crack width relationship of concrete

Flexural behavior of high-strength, steel-reinforced, and prestressed concrete beams

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

Experiment and calculation of crack width of reinforced concrete beams with 500MPa steel bars

A Theoretical Method to Determine the Tortuous Crack Length and the Mechanical Parameters of Concrete in Direct Tension—a Particle Size Effect Analysis

Size Effect On Fatigue In Bending Of Concrete

Calculation Method and Experimental Research for Crack Width in RC Single Column Piers

Study on Reliability of the Maximum Crack Width for Flexural Members of Reinforced Concrete Bridges

The influence of longitudinal rebar type and stirrup ratio on the bond performance of reinforced concrete with corrosion

Modelling the corrosion mechanism of steel bars in chloride-contaminated concrete with transverse cracks

An Analytical Solution for Evaluating the Effect of Steel Bars in Cracked Concrete

Influence of Specimen Width on Crack Propagation Process in Lightly Reinforced Concrete Beams

Analysis of Concrete Fracture Process and Size Effect