Abstract:This research work aims to compare the strength and fracture mechanics properties of plain concretes, obtained from different coarse aggregates. During the study, mechanical parameters including compressive strength (fcm) and splitting tensile strength (fctm), as well as fracture parameters involving critical stress intensity factor (KIcS) and critical crack tip opening displacement (CTODc) were evaluated. The effect of the aggregates used on the brittleness of the concretes was also analyzed. For better understanding of the crack initiation and propagation in concretes with different coarse aggregates, a macroscopic failure surfaces examination of the tested beams is also presented. Crushed aggregates covered were basalt (BA), granite (GT), and limestone (LM), and natural peeble gravel aggregate (GL) were used in the concrete mixtures. Fracture toughness tests were performed on an MTS 810 testing machine. Due to the high strength of the rock material, the rough surface of the aggregate grains, and good bonding in the ITZ area between the aggregate and the paste, the concretes with crushed aggregates exhibited high fracture toughness. Both of the analyzed fracture mechanics parameters, i.e., KIcS and CTODc, increased significantly in the case of concretes which were manufactured with crushed aggregates. They amounted, in comparison to concrete based on gravel aggregate, to levels ranging from 20% for concrete with limestone aggregate to over 30% for concrete with a granite aggregate, and to as much as over 70% for concrete with basalt aggregate. On the other hand, the concrete with gravel aggregate showed the lowest fracture toughness because of the smooth surface of the aggregate grains and poor bonding between the aggregate and the cement paste. However, the fracture process in each series of concrete was quasi-plastic in the case of gravel concrete, semi-brittle in the case of limestone concrete, and clearly brittle in the case of the concretes based on granite and basalt aggregates. The results obtained help to explain how the coarse aggregate type affects the strength parameters and fracture toughness at bending.

Effect of coarse‐aggregate shape on strength of hydraulic concrete

Effect of Aggregate on Cracking Behaviours of Concrete in Mesoscopic Modeling

COMPRESSIVE STRENGTHS OF CONCRETE CONTAINING RICE HUSK ASH WITHOUT PROCESSING

Concrete Aggregate-Gradation Effect and Strength-Criterion Modification for Fully Graded Hydraulic Concrete

Influence of Coarse Aggregate Type on the Mechanical Strengths and Durability of Cement Concrete

IMPACT OF COARSE AGGREGATE ON COMPRESSIVE STRENGTH OF CONCRETE

Numerical Method for Predicting Young's Modulus of Concrete with Aggregate Shape Effect

Effect of Aggregate Type on Mechanical Behavior of Dam Concrete

Effect of coarse aggregate size distribution on concrete strength development process

Effect of coarse aggregate content on fracture parameters of concrete

Numerical Study on the Effect of Coarse Aggregate Shape during Concrete Mixing Process

A Numerical Method for the Chloride Diffusivity in Concrete with Aggregate Shape Effect

EFFECT OF COARSE/FINE AGGREGATE RATIO AND CEMENT MATRIX STRENGTH ON FRACTURE PARAMETERS OF CONCRETE

Effects of Coarse Aggregate Type in Cement Concrete on Spatial Distribution Characteristics

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

Influence of coarse aggregate size and cement matrix strength on stress–crack width relationship of concrete

Effect of coarse aggregate size on non-uniform stress/strain and drying-induced microcracking in concrete

Effect of Coarse Aggregate Type on the Fracture Toughness of Ordinary Concrete

Effect of Volume Fraction of Coarse Aggregate on Elastic Modulus and Compressive Strength of Concrete

Investigation and prediction of impact of aggregate size and shape on porosity and compressive strength of pervious concrete

Effect of coarse aggregate size distribution on fracture toughness of concrete based on boundary effect model