Abstract:Application of recycled coarse aggregate concrete (RAC) will generate considerable environmental benefits. However, the properties of RAC must be studied before being adopted in structures. In this research, the failure process and damage assessment of RAC under compression were investigated by applying acoustic emission (AE) technology. The variables include loading rates, maximum coarse aggregate sizes, and water–cement ratios (w /c ). Meanwhile, an innovative approach called stage cumulative proportion (SCP) analysis of AE result was put forward. Subsequently, the damage of RAC under compression was evaluated based on the rate process theory. The results demonstrated that void compaction and original crack expansion occurred first in the test and then the stable microcracking in interfacial transition zone (ITZ) and unstable cracking in mortar, and finally, there is the macrocrack expansion followed by the fracture. It was found that AE counts and energy were mainly produced before the peak stress was reached. The increase in loading rate caused the AE counts and energy to increase in stable microcracking of ITZ but decreased in unstable cracking of mortar. Increasing the w /c would also affect the AE results in these stages, but the effect was the opposite to the loading rate. Besides, an increase in coarse aggregate sizes would increase the AE counts and energy in unstable cracking of mortar and decrease in macrocrack expansion. In addition, a polynomial expression of the relationship between AE parameters and stress level was established. Then, an evaluation criterion was proposed based on the expressions and the rate process theory.

Investigation of Self-Compacting Concrete Behavior under Axial Load by Acoustic Emission Method

Shrinkage and Creep of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregates, Fly Ash, Slag, and Silica Fume

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

Study of the Healing Effect of Concrete with Supplementary Cementitious Materials after Early-Age Damage by Acoustic Emission Technique

The pre-interventional psychiatric history – An underestimated confounder in benign intracranial lesions studies

Experimental Study of Crack Characteristics of Self-Compacting Rubberized Concrete under Four-Point Bending Based on Acoustic Emission Technique

Investigation of Engineering Properties of Self-Compacting Concretes Produced with Different Mineral Additives

An Experimental Study of Dynamic Compression Performance of Self-Compacting Concrete

The Effect of Low Velocity Impact Loading on Self-Compacting Concrete Reinforced with Carbon Fiber Reinforced Polymers

Acoustic emission behavior and damage evaluation of recycled aggregate concrete under compression

Experimental Investigation of Self-Compacting Concrete with Recycled Concrete Aggregate

Cracking Mechanism of Corroded Reinforced Concrete Column Based on Acoustic Emission Technique

Quantitative statistical analysis of the crack propagation and fracture process of self‐compacting rubber concrete based on acoustic emission

Damage Evaluation of Concrete under Uniaxial Compression Based on the Stress Dependence of AE Elastic Wave Velocity Combined with DIC Technology

Performance and Uniformity of Self-Compacting Concrete

Experimental study on loading rate and notch-to-depth ratio effects on flexural performance of self-compacting concrete with acoustic emission and digital image correlation technologies

Acoustic Emission Monitoring of Progressive Damage of Reinforced Concrete T-Beams under Four-Point Bending

Acoustic emission analysis applied to concrete under different loading

Investigation of Bonding Behavior of FRP and Steel Bars in Self-Compacting Concrete Structures Using Acoustic Emission Method

Evaluation of alkali–silica reaction damage in concrete by using acoustic emission signal features and damage rating index: damage monitoring on concrete prisms

To Monitor Fracture Behaviors in Four-Point Cyclic Bending Tests of Low-Activated High Alumina Concrete and Standard Concrete RC Beams Using Acoustic Emission Technique