Abstract:Rubberized steel fiber reinforced recycled aggregate concrete (RSRAC) is an environmental-friendly building material produced from waste concrete and tires. However, the evolution of fracture behavior in RSRAC under flexural loads still remains unknown, and the individual as well as the coupling effects of recycled aggregate (RA), crumb rubber, and steel fiber are also unclear. In this paper, four groups of specimens with different contents of RA, crumb rubber, and steel fiber were prepared, and a series of four-point bending tests were conducted. The loading process was monitored by acoustic emission (AE) in real-time, and the fracture behavior was then analyzed through AE signals using multiple statistical methods including Ib -value method, cumulative energy analysis, intensity analysis, K-means clustering and RA-AF analysis. Scanning electron microscope (SEM) was also employed to give explanations in microscale. Results show that the fracture process of RSRAC can be divided into micro-crack stage, main collapse stage, and residual stage. A fluctuation greater than 0.06 in Ib -value could be regarded as a criterion for this division. AE counts, cumulative AE energy as well as cluster analysis are also effective in judging the sub-stages. The dominant failure mode in micro-crack stage and residual stage is tensile crack, and shear cracks mainly occur in the main collapse stage. SEM investigation has revealed that the shear cracks in the main collapse stage mainly come from the shear failure of acicular crystals or micro-chimeras at the interface. For effects of different materials, it is found that rubber can reduce the brittleness and improve the ductility of the concrete, but will lower the strength properties. Steel fiber can increase the brittleness of the fracture behavior and reduce the ductility, but is favorable to strength. While RA can increase the brittleness and is harmful to both ductility and strength. The coexistence of rubber and steel fiber can significantly shorten the residual stage. The work is expected to provide a deeper understanding on the properties of RSRAC.

Experimental Study of Crack Characteristics of Self-Compacting Rubberized Concrete under Four-Point Bending Based on Acoustic Emission Technique

Quantitative statistical analysis of the crack propagation and fracture process of self‐compacting rubber concrete based on acoustic emission

Experimental Study on the Anti-Cracking Performance for High Viscoelastic Asphalt Sand with SCB

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

Mechanical Properties and Fracture Behavior of Crumb Rubber Basalt Fiber Concrete Based on Acoustic Emission Technology

Statistical analysis on the fracture behavior of rubberized steel fiber reinforced recycled aggregate concrete based on acoustic emission

Study on mechanical properties of AR-SAMI

Experimental and numerical investigation on fracture characteristics of self-compacting concrete mixed with waste rubber particles

Experimental study on fracture properties of self-compacting concrete

Fracture behavior investigation of self-compacting rubberized concrete by DIC and mesoscale modeling

Experimental study on loading rate and notch-to-depth ratio effects on flexural performance of self-compacting concrete with acoustic emission and digital image correlation technologies

Study of the Healing Effect of Concrete with Supplementary Cementitious Materials after Early-Age Damage by Acoustic Emission Technique

Cracking characteristics evaluation for reinforcement basalt fiber reactive powder concrete beam using acoustic emission

Experimental study on acoustic emission and surface morphology characteristics of concrete under different fracture modes

Investigation of Self-Compacting Concrete Behavior under Axial Load by Acoustic Emission Method

To Monitor Fracture Behaviors in Four-Point Cyclic Bending Tests of Low-Activated High Alumina Concrete and Standard Concrete RC Beams Using Acoustic Emission Technique

Damage Pattern Recognition and Crack Propagation Prediction for Crumb Rubber Concrete Based on Acoustic Emission Techniques

Acoustic Emission Analysis of Crack Type Identification of Corroded Concrete Columns under Eccentric Loading: A Comparative Analysis of RA-AF Method and Gaussian Mixture Model

Acoustic Emission Waves Propagation in Rubberized Concrete under Special Monitoring Conditions

Identification of Bending Fracture Characteristics of Cement-Stabilized Coral Aggregate in Four-Point Bending Tests Based on Acoustic Emission