Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

High-strain Rate Compressive Behavior of Concrete Made with Substituted Coarse Aggregates: Recycled Crushed Concrete and Clay Bricks

High-strain Rate Compressive Behavior of Concrete with Two Different Substituted Recycled Plastic Aggregates: Experimental Characterization and Probabilistic Modeling

High-strain Rate Compressive and Tensile Behavior of Concrete with Substituted Polyamide Sand

Behavior of FRP-Confined Recycled Brick Aggregate Concrete under Monotonic Compression

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Shrinkage and Creep of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregates, Fly Ash, Slag, and Silica Fume

Compressive Behavior of CFRP-Confined Recycled Aggregate Concrete in Different-Sized Circular Sections (vol 17, pg 313, 2020)

High-strain Rate Compressive Behavior of CFRP Confined Concrete: Large Diameter SHPB Tests

Performance of Recycled Aggregate Concrete in A Real Project

Compressive Behavior of Engineered Cementitious Composites under High Strain-Rate Loading

Flexural Behavior and Durability Properties of Recycled Aggregate Concrete (RAC) Beams Subjected to Long-Term Loading and Chloride Attacks

Mechanical properties of recycled aggregate concrete containing brick particles

Compressive performance and stress-strain relationship of geopolymer recycled brick aggregate concrete

Experimental study and numerical simulation of impact compression mechanical properties of high strength coral aggregate seawater concrete

Compressive stress–strain relationship and its variability of basalt fiber reinforced recycled aggregate concrete

Shear Performance of Reinforced Concrete Beams Affected by Satisfactory Composite-Recycled Aggregates

Triaxial compressive performance of recycled aggregate/glass sand concrete: Experimental study and mechanism analysis

Testing and Prediction of the Strength Development of Recycled-Aggregate Concrete with Large Particle Natural Aggregate

Fracture performance of concrete incorporating different levels of recycled coarse aggregate

Study on Mechanical Properties and Mesoscopic Numerical Simulation of Recycled Concrete

High-strain rate tension behavior of Fiber-Reinforced Rubberized Concrete