Abstract:Concrete compressive strength is one of the most important material performance indices which can reflect the quality of concrete materials. In this paper, an innovative test method is proposed for monitoring development of concrete compressive strength in full curing period using smart piezoelectric modules (SPMs). The proposed method overcomes the shortcomings of traditional concrete detection methods, and it can realize nondestructive, real time, continuous and in-situ monitoring of concrete strength during the whole curing period of concrete structures. A series of experiments are conducted to demonstrate the validity and effectiveness of the approach using SPMs. It is clear that the energy values of monitoring signals from SPMs can be applied as the characteristic identification parameter for concrete compressive strength. The signal waveform and frequency suitable for monitoring of concrete compressive strength are determined, and a standard test procedure using SPMs in monitoring of concrete compressive strength is defined. Finally, the equations for correlating the signal energy ratio and compressive strength ratio of different grade concrete (i.e., C30, C40 and C50) based on the monitoring data from SPMs are established. The compressive strength of concrete under the given curing age can be effectively predicted by the present monitoring test method using SPMs and the established correlation equations, which are capable of assessing the concrete condition and strength in the whole curing period.

Estimation on Compressive Strength of In Situ Concrete with Innovative Pendulum Hammering Test Method

Experimental research on the strength of concrete mearsured by limpet

Compressive Impact Tests of Lightweight Concrete with 155-Mm-diameter Spilt Hopkinson Pressure Bar

In-situ test of bearing capacity behavior of composite foundation with rigid-flexible piles

A New Methodology to Estimate the Early Age Compressive Strength of Concrete Before Demolding

Experimental Study on the Compressive Strength of Big Mobility Concrete with Nondestructive Testing Method

In-situ strength testing of high strength concrete

Experimental Research on Concrete Strength Prediction by Limpet Pull-off Test in China

A two stage procedure for assessment of in situ concrete strength using combined non-destructive testing

Influence of Soil Reinforcement on the Uplift Bearing Capacity of a Pre-Stressed High-Strength Concrete Pile Embedded in Clayey Soil

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

Field Behavior of Pre-Stressed High-Strength Concrete Nodular Piles and PHC Pipe Piles Under Compression in Soft Soil Areas

Quantitative Comparison of Estimation Methods for Determining the in Situ Characteristic Concrete Compressive Strength

STUDY ON GLUING-PULLING METHOD FOR CONCRETE STRENGTH TEST

New Local Compression Test to Estimate in Situ Compressive Strength of Masonry Mortar

Probabilistic Model for Long-Term Time-Dependent Compressive Strength of Concrete in Existing Buildings

In-situ strength estimation of polypropylene fibre reinforced recycled aggregate concrete using Schmidt rebound hammer and point load test

Field Test Study on Installation Effect of PHC Pipe Pile by Hammer-driving in Interactive Marine and Terrestrial Deposit

Monitoring and estimate of concrete compressive strength in full curing period using smart piezoelectric modules

Assessing the Spatial Variability of the Concrete by the Rebound Hammer Test and Compression Test of Drilled Cores

Combined Use of Non-Destructive Tests for Assessment of Strength of Concrete in Structure