Abstract:The engineering application of recycled aggregate concrete is significant for resource conservation and environmental protection. However, the applied range of recycled aggregate concrete is greatly limited due to microscopic defects such as microcracks in recycled aggregate. Steel-polypropylene fiber reinforced recycled concrete (SPRAC) makes up for the defects brought by recycled aggregate to a certain extent due to the action of hybrid fiber. To further promote the practical application of SPRAC, it is crucial to evaluate its damage-fracture mechanic's response mechanism under different hybrid fiber admixtures and recycled aggregate replacement rates. For this purpose, the following work is carried out in this paper: firstly, SPRAC beam specimens with different substitution rates of hybrid fiber and recycled aggregate were prepared; and the damage-fracture process of specimens under four-point bending load was monitored in real-time by using acoustic emission and digital image correlation techniques to analyze the influence of hybrid fiber and recycled aggregate on the flexural properties and damage-fracture characteristics of SPRAC; the inherent relationship between the acoustic emission rise time/amplitude (RA) and the average frequency (AF) is utilized to classify the crack type of SPRAC in the course of the data analysis; the b-value is also analyzed to assess the crack evolution process in SPRAC, and the corresponding warning thresholds are given.; strain and displacement fields on the specimen surface are analyzed using the digital image correlation; finally, the microscopic results of SPRAC are also given to better understand the damage-fracture evolution mechanism of SPRAC. Results show that the flexural strength and fracture toughness of SPRAC decreased nonlinearly with the increase of recycled aggregate content; on the contrary, the addition of hybrid fiber improved the mechanical properties of SPRAC. The study in this paper provides a new method to characterize the damage-fracture mechanism of SPRAC under bending loads quantitatively. It provides a reference for the engineering application of SPRAC.

In-situ strength estimation of polypropylene fibre reinforced recycled aggregate concrete using Schmidt rebound hammer and point load test

High-strain Rate Compressive Behavior of Concrete with Two Different Substituted Recycled Plastic Aggregates: Experimental Characterization and Probabilistic Modeling

High-strain Rate Compressive and Tensile Behavior of Concrete with Substituted Polyamide Sand

Intensified Test Research on the Influence of Polypropylene Fiber & Silica Fume on Recycled Concrete

Concrete Incorporating Recycled Plastic Aggregates: Physical and Mechanical Properties and Predictive Models

High-strain Rate Compressive Behavior of Concrete Made with Substituted Coarse Aggregates: Recycled Crushed Concrete and Clay Bricks

Experimental Research the Shearing Performance of Grading-Fiber Reinforced Reactive Powder Concrete

Experimental Study on Mechanical Performance and Microstructure of Polypropylene Fiber Recycled Concrete

Mechanical performance, water and chloride permeability of hybrid steel-polypropylene fiber-reinforced recycled aggregate concrete

Mechanical properties of short polypropylene fiber enhanced recycled concrete under cyclic compression

Mechanical Properties of Polypropylene Fiber Recycled Brick Aggregate Concrete and Its Influencing Factors by Gray Correlation Analysis

Mechanical Properties of Fully Recycled Aggregate Concrete Reinforced with Steel Fiber and Polypropylene Fiber

Compressive performance of fiber reinforced polymer encased recycled concrete with nanoparticles

A Study of Energy Dissipation of Polypropylene Fiber Reinforced Recycled Concrete Under Uniaxial Compression

Study on mechanical properties and microcosmic morphology of polypropylene fiber reinforced recycled concrete after freeze–thaw cycles

Damage-fracture mechanism analysis of steel-polypropylene fiber reinforced recycled concrete based on acoustic emission and digital image correlation

Evaluation of performance of hybrid fiber-reinforced self-compacting concrete using non-destructive testing techniques

The effectiveness of surrogate models in predicting the long-term behavior of varying compressive strength ranges of recycled concrete aggregate for a variety of shapes and sizes of specimens

An Investigation of Mechanical Properties of Concrete by Applying Sand Coating on Recycled High-Density Polyethylene (HDPE) and Electronic-Wastes (E-Wastes) Used as a Partial Replacement of Natural Coarse Aggregates

Experimental investigation of eco-friendly fiber-reinforced concrete using recycled and natural fibers, integrated with recycled aggregates

Estimation on Compressive Strength of In Situ Concrete with Innovative Pendulum Hammering Test Method