Abstract:Solid oxide fuel cell (SOFC), which is a generation device that converts chemical energy into electrical energy, has been regarded as a new generation device. The diffusion mechanism of metal cations and anions during the high‐temperature oxidation process of SOFC is proposed. Based on the equilibrium expression and diffusion equation, the chemo‐mechanical coupling relationship between oxide stress and thickness growth of the oxide layer is established by considering the influences of viscoplastic effect and oxide growth effect. The present theoretical result is consistent with the previous experimental results. In addition, the stress critical points corresponding to different parameters are different in initial oxidation stage. The oxide stress varies dramatically with time in the compressive stress phase, but it changes slowly in the tensile stress phase. The compressive stress that exists in the oxide layer increases with the growth coefficient (DNiO = 1000‐15 000 m−1) of the oxide layer. The oxide stresses in oxide layer and electrolyte reduce with viscoplastic coefficient of the oxide layer from JNiO = 8.97 × 10−5 Pa−1 s−1 to JNiO = 16.97 × 10−5 Pa−1 s−1 and anode‐oxide layer thicknesses from H = 30 μm to H = 660 μm, while they increase with viscoplastic coefficient of the anode from JNi = 3.81 × 10−5 Pa−1 s−1 to JNi = 12.81 × 10−5 Pa−1 s−1 and kinetic parabolic constant from kp = 2.9 × 10−15 m2s−1 to kp = 12.9 × 10−15 m2s−1 in whole oxidation stage. The oxide thickness increases with kinetic parabolic constant in the whole oxidation stage and this changing trend accords with parabolic diffusion law. The oxide thickness increases with temperatures increasing. The results obtained from this study will provide the reference to the researches of the chemo‐mechanical coupling model and performance optimization of SOFC under high‐temperature oxidation.

Effects of a cooling channel on the creep damage and failure probability of planar solid oxide fuel cells

Investigation of creep damage and failure probability in solid oxide fuel cells with different flow channel geometries

Study on creep damage and life prediction of the planar solid oxide fuel cell by modeling of multiphysics coupled

Numerical Study on the Mechanical Stress and Mechanical Failure of Planar Solid Oxide Fuel Cell

Effect of Temperature Fluctuation on Creep and Failure Probability for Planar Solid Oxide Fuel Cell

Solid Oxide Electrolysis Cell under Real Fluctuating Power Supply with a Focus on Thermal Stress Analysis

Mismatch effect of material creep strength on creep damage and failure probability of planar solid oxide fuel cell

High temperature creep strength design and optimization of solid oxide fuel cell

Effect of Operating Temperature on Creep and Damage in the Bonded Compliant Seal of Planar Solid Oxide Fuel Cell

Analysis on Thermal Stress of a Planar Solid Oxide Fuel Cell

Effect of Inhomogeneous Oxidation on the Mechanical Degradation of Anode Supported Solid Oxide Fuel Cell

Modeling of an Anode Supported Solid Oxide Fuel Cell Focusing on Thermal Stresses

Numerical Analysis of Thermal Stress for a Stack of Planar Solid Oxide Fuel Cells

Transient Thermomechanical Analysis of a Solid Oxide Fuel Cell Stack Based on 3D Multiphysical Field Model

Effect of Interface Morphology on the Residual Stress Distribution in Solid Oxide Fuel Cell

Evolution of Thermal Stress and Failure Probability During Reduction and Re Oxidation of Solid Oxide Fuel Cell

Long-term Evolution of Mechanical Performance of Solid Oxide Fuel Cell Stack and the Underlying Mechanism

Numerical Study Of Thermal Stresses In A Planar Solid Oxide Fuel Cell Stack

Thermal Stress in Full-Size Solid Oxide Fuel Cell Stacks by Multi-Physics Modeling

Progress in Macro Scale Mechanical Effects Investigation of Solid Oxide Fuel Cells

Chemo‐mechanical coupling model of solid oxide fuel cell under high‐temperature oxidation