Abstract:A solid oxide fuel cell (SOFC) is a clean and high-efficiency energy conversion device, which undergoes improvement of performance continuously. The transport of gas species and charges proceed in the porous electrodes. The porous electrodes are also responsible for the removal of exhaust gases. In this paper, a fully coupled 3D single-channel multiphysics computational fluid dynamics (CFD) model was developed based on the finite element method (FEM). The governing equations for momentum, species, charges, and heat transport were solved by a segregated solver. The impact of decreased ionic, electronic, and pore phase tortuosity on the SOFC performance such as fuel utilization, current density, activation overpotential and temperature distribution are analyzed and compared with the base case. In addition to the tortuosity investigation, the volume fraction of the electronic phase in the active layer and the support layer is also investigated using a parametric sweep study. Of all the decreased tortuosity cases, there is an increase in ionic current density and temperature compared with the base case. Except for a decreased pore tortuosity, all other cases led to an increase of electronic current density compared with the base case. The consumption of hydrogen increased for all cases compared with the base case. The activation overpotential increased with decreased electronic phase and pore phase tortuosity, while a decrease of ionic phase tortuosity caused a decrease. Finally, when decreasing all phase tortuosity, both current density, temperature, activation overpotential, and hydrogen consumption increased. For the parametric sweep, there is an optimum electronic phase volume fraction value. This work allows for a better understanding of the relationship between the microstructure and performance of SOFCs. Meanwhile, it provides theoretical guidance for a better porous electrode design.

Effect of Interconnector Rib on Optimization of SOFC Structural Parameters

Performance Analysis of Flat-chip Solid Oxide Fuel Cells with Discrete Interconnector Designs

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

The Influence of Interconnect Ribs on the Performance of Planar Solid Oxide Fuel Cell and Formulae for Optimal Rib Sizes

The effects of the interconnect rib contact resistance on the performance of planar solid oxide fuel cell stack and the rib design optimization

Optimization Of Distributed Cylindrical Interconnect Ribs For Anode- And Cathode-Supported Solid Oxide Fuel Cell

Discrete triangular interconnector design for performance enhancement of planar solid oxide fuel cells

Optimization of the Interconnect Ribs for a Cathode-Supported Solid Oxide Fuel Cell

A numerical study of the performance of solid oxide fuel cell with bi-layer interconnector

Numerical study on a novel SOFC with bi-layer interconnector

Effect Of Bi-Layer Interconnector Design On The Current Density Of Solid Oxide Fuel Cells

Optimization of interconnect flow channels width in a planar solid oxide fuel cell

Optimal Design of Bi-Layer Interconnector for Sofc Based on Cfd-Taguchi Method

Parametric Study for Electrode Microstructure Influence on SOFC Performance

Optimized design of planar solid oxide fuel cell interconnectors

A novel interconnector design of SOFC

Modeling of solid oxide fuel cells with optimized interconnect designs

Effect of Rib Width and Cathode Thickness On the Performance of MOLB-Type SOFC

Three‐dimensional Nonisothermal Modeling of Solid Oxide Fuel Cell Coupling Electrochemical Kinetics and Species Transport

The effect of interconnect rib size on the fuel cell concentration polarization in planar SOFCs

Effect of Bi-Layer Interconnector Design on Mass Transfer Performance in Porous Anode of Solid Oxide Fuel Cells