Abstract:Solid oxide fuel cell (SOFC), which is a generation device that converts chemical energy into electrical energy, has been regarded as a new generation device. The diffusion mechanism of metal cations and anions during the high‐temperature oxidation process of SOFC is proposed. Based on the equilibrium expression and diffusion equation, the chemo‐mechanical coupling relationship between oxide stress and thickness growth of the oxide layer is established by considering the influences of viscoplastic effect and oxide growth effect. The present theoretical result is consistent with the previous experimental results. In addition, the stress critical points corresponding to different parameters are different in initial oxidation stage. The oxide stress varies dramatically with time in the compressive stress phase, but it changes slowly in the tensile stress phase. The compressive stress that exists in the oxide layer increases with the growth coefficient (DNiO = 1000‐15 000 m−1) of the oxide layer. The oxide stresses in oxide layer and electrolyte reduce with viscoplastic coefficient of the oxide layer from JNiO = 8.97 × 10−5 Pa−1 s−1 to JNiO = 16.97 × 10−5 Pa−1 s−1 and anode‐oxide layer thicknesses from H = 30 μm to H = 660 μm, while they increase with viscoplastic coefficient of the anode from JNi = 3.81 × 10−5 Pa−1 s−1 to JNi = 12.81 × 10−5 Pa−1 s−1 and kinetic parabolic constant from kp = 2.9 × 10−15 m2s−1 to kp = 12.9 × 10−15 m2s−1 in whole oxidation stage. The oxide thickness increases with kinetic parabolic constant in the whole oxidation stage and this changing trend accords with parabolic diffusion law. The oxide thickness increases with temperatures increasing. The results obtained from this study will provide the reference to the researches of the chemo‐mechanical coupling model and performance optimization of SOFC under high‐temperature oxidation.

High temperature creep strength design and optimization of solid oxide fuel cell

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Mismatch effect of material creep strength on creep damage and failure probability of planar solid oxide fuel cell

Solid Oxide Electrolysis Cell under Real Fluctuating Power Supply with a Focus on Thermal Stress Analysis

Study on creep damage and life prediction of the planar solid oxide fuel cell by modeling of multiphysics coupled

Numerical Modeling and Current Collection Designs for Flat-Chip Solid Oxide Fuel Cell

Effects of a cooling channel on the creep damage and failure probability of planar solid oxide fuel cells

Investigation of creep damage and failure probability in solid oxide fuel cells with different flow channel geometries

Long-term thermo-mechanical performance evolution of a 15-cell solid oxide fuel cell stack

Fatigue-Creep Interaction Of P92 Steel And Modified Constitutive Modelling For Simulation Of The Responses

Simulation and Analysis of Thermal Stress and Sintering Warpage of Planar Solid Oxide Fuel Cells

Real-time deformation and stress response of the planar SOFC during sintering

Towards Feasible Temperature Management and Thermo-Mechanical Stability of Carbon-Assisted Solid Oxide Electrolysis Cell

Finite element modeling of creep behavior of porous nickel alloys at the operating conditions of molten carbonate fuel cell

Modeling of cooperative defect transport and thermal mismatch in a planar solid oxide fuel cell

A Numerical Investigation of the Thermal Stresses of a Planar Solid Oxide Fuel Cell

Thermal Shock Resistance and Failure Probability Analysis on Solid Oxide Electrolyte Direct Flame Fuel Cells

Effect of holding time in brazing cooling process on creep life of the solid oxide fuel cell with bonded compliant seal

Failure Mechanism and Optimization of Metal-Supported Solid Oxide Fuel Cells

Chemo‐mechanical coupling model of solid oxide fuel cell under high‐temperature oxidation

Coarse-grained molecular dynamics modeling and parameter analysis for sintered interface structures in sandwiched tri-layers reversible solid oxide fuel cell