Abstract:The functional film based on alumina/silica can greatly improve the absorptivity of stray light and effectively avoid the formation of high-order ghost light after multiple reflection of stray light in high-energy laser system, which can lead to material splashing and irreversible contamination of the high-energy laser system. This process is currently difficult to dynamically capture through experiments. Therefore, it is important and challenging to accurately analyze the multiple physical fields and damage evolution involved in the stray light action process by combining experiment and simulation and explore the response relationship between the action effect and laser parameters. In this paper, the mechanical properties parameters of the films were firstly determined by experiments combined with the inverse finite element method. The process of systemic stray laser with four typical energy densities irradiating on stray-light-absorbing functional films prepared by anodic oxidation and electrolysis was analyzed. We developed a dynamic thermal-mechanical-damage direct coupling model through ABAQUS and its secondary development, considering the temperature dependence of the thermodynamic and optical parameters of the three materials, the damage characteristics of brittle materials, and the adaptive progressive loading of the surface heat source boundary. Then, the multi physical fields and damage evolution with different material constitutive models were compared and analyzed. Compared with the JH-2 constitutive, bilinear constitutive is more suitable to describe the thermo-mechanical evolution of ceramic oxide functional films in the simulation of laser-irradiating process. The response relationship between damage and pulse number and the damage mechanism were analyzed from the perspective of experiment, which is in good agreement with the simulation results. The damage of functional films is not sensitive to the number of pulses but the damage is more sensitive to the initial defect, which can induce and enhance.

Simulation and Experimental Research on Laser-induced Damage of Porcelain Insulators

Researches on Laser Damage Resistance of Optical Films

Numerical Analysis and Experimental Study of the Laser Cleaning of Ceramic Insulator Contamination

Analysis and Experimental Investigation of Laser Induced Damage of Optics

Laser-induced Damage in a Silicon-Based Photodiode by MHz Picosecond Laser

Research on Leakage Current Waveform Spectrum Characteristics of Artificial Pollution Porcelain Insulator

Laser-Induced Damage Initiation and Growth of Optical Materials

Study of simulation and experimental on the damage of stray light absorbing function films induced by nanosecond laser

Investigation on pulsed laser damage resistance of high-absorption ceramic coatings

Cumulative Damage Effect of the Pin-type Porcelain Insulator Incipient Fault in the Resonant Grounded Distribution Networks

A Study on Porcelain Insulator Flashover Voltage Evaluation System on Atmospheric Pollution Condition

Time-dependent density functional theory of high-intensity, short-pulse laser irradiation on insulators

Research on Laser-Induced Damage Post-Restoration Morphology of Fused Silica and Optimization of Patterned CO2 Laser Repair Strategy

Influence of Organic Pollutants on the Pollution Flashover Properties of Porcelain Insulators

Insulator Contamination Analysis Based on Laser-Induced Breakdown Spectroscopy

Laser-induced damage properties of antireflective porous glasses

Simulation study on laser damage threshold of optical window materials

Effects of CO2 Laser and Vacuum Plasma Cleanings on Silica-Oil-and-grease Polluted Quartz Substrates

Investigation of laser induced damage on K9 glass surface using multi-pulse laser

Study on Thermal Damage to Balsaming Lens Induced by Multi-Pulse Laser

Surface damage induced by micropores in transparent ceramics under nanosecond laser irradiation