Abstract:Material response and the launch of laser plasma during the 1064 nm nanosecond laser pulse induced damage to the exit surface of fused silica are investigated. Employing a polarization-based two-frame shadowgraphy setup with ～ 60 fs probing resolution, the transient material responses from the rising part of nanosecond pumping pulse to several hundred nanosecond timescale are captured. Using a shearing interferometry setup, the evolution of transient phase shift of laser plasma in the expansion process to the ambient air is also investigated. Inhomogeneous distribution of phase shift caused by the electrons and neutrals in the plasma is quantitatively resolved by employing the fast Fourier transform based filtering algorism. To demonstrate the evolutions of important plasma parameters such as pressure, temperature and density, a continuum hydrodynamic model is numerically solved. The initial pressure of plasma is estimated according to the point-explosion model, and the initial plasma temperature is achieved by calculating the difference between simulating shockwave front radius and experimental value at the same delay. The optimal temperature is chosen when the radius difference is minimal. Main conclusions are as follows. 1) Abundant suprathermal electrons are excited in the early energy deposition process. Part of these electrons contribute to the thermal transport process and produce the laser supported solid-state absorption front (LSSAF) which propagates into the bulk silica. Other electrons escape to the air side and contribute to the formation of air plasma through the impact ionization process. Plasma expansion speed is about 20 km/s during this phase. 2) When the pump pulse is terminated, the LSSAF and air plasma lose their energy supplied and experience a rapid decline of the temperature and expansion velocity. As a result, the final damage crater depth exhibits seldomly no increase compared with the transient crater depth during this phase. Hot bulk plasma formed in this phase becomes the damage precursor and induces the ejection of abundant neutrals probably due to the phase explosion mechanism. Inhomogeneous distribution of stress is formed by Rayleigh-Taylor instability at the interface between hot bulk plasma and surrounding bulk material during the expansion of LSSAF. Radial and circumferential cracks are formed due to the release of stress. 3) Evolution of air plasma follows the conventional evolution process of laser-induced plasma, i. e. , internal pressure, temperature and density decrease quickly with time delay. The simulated transient highest pressure is about 600 MPa. Simulation also predicts the formation of the internal shockwave. Our work will be helpful in understanding the laser damage mechanism of the fused silica optical window.

Time-dependent density functional theory of high-intensity, short-pulse laser irradiation on insulators

Combined Continuum-Atomistic Modeling of Ultrashort-Pulsed Laser Irradiation of Silicon

Monte Carlo/molecular Dynamics Simulation on Melting and Evaporating Processes of Material Due to Laser Irradiation

Molecular Dynamics Simulation Of Ultra-Fast Thermal Transition In Thin Foil Irradiated By High Power Ultra-Short Laser

Damage Induced by Femtosecond Laser in Optical Dielectric Films

First-principles simulation of the optical response of bulk and thin-film α-quartz irradiated with an ultrashort intense laser pulse

Atomic-Level Modeling of A Silicon Nanofilm Irradiated by Ultrashort-Pulsed Laser Bursts

Hydrodynamic Simulation of Silicon Ablation by Ultrashort Laser Irradiation

Experimental and Computational Study of Damage Pocess Induced by 1064 Nm Nanosecond Laser Pulse on the Exit Surface of Fused Silica

Microscopic Mechanisms of Ablation and Micromachining of Dielectrics by Using Femtosecond Lasers

Numerical Simulation of Thermal Effect in Fused Silica Irradiated by Nanosecond High Repetition Rate Laser

Damage Mechanism of Fused Silica Optical Dielectric Film Irradiated by Short Pulse Laser

Mechanisms In Fs-Laser Ablation In Fused Silica

Numerical Simulation of Femtosecond Laser Ablation of Quartz Glass and Silicon Nitride

First-principles Calculation of Multiphoton Absorption Cross Section of Α-Quartz under Femtosecond Laser Irradiation

Delayed Phase Explosion During High-Power Nanosecond Laser Ablation of Silicon

Modelling ultrafast non-equilibrium carrier dynamics and relaxation processes upon irradiation of hexagonal Silicon-Carbide with femtosecond laser pulses

Numerical Investigation of the Kinetics of Non-Equilibrium Phase Transitions in Silicon Induced by an Ultra-Short Laser Pulse

Thermal Model for Nanosecond Laser Sputtering at High Fluences

Atomic Simulation of Surface Damage of Fused Silica under Laser Irradiation

Theoretical and Experimental Research of Femtosecond Laser Processing Fused Silica