Abstract:Usually, the air gap will appear inside the composite insulators and it will lead to serious accident. In order to detect these internal defects in composite insulators operated in the transmission lines, a new non-destructive technique has been proposed. In the study, the mathematical analysis model of the composite insulators inner defects, which is about heat diffusion, has been build. The model helps to analyze the propagation process of heat loss and judge the structure and defects under the surface. Compared with traditional detection methods and other non-destructive techniques, the technique mentioned above has many advantages In the study, air defects of composite insulators have been made artificially. Firstly, the artificially fabricated samples are tested by flash thermography, and this method shows a good performance to figure out the structure or defects under the surface. Compared the effect of different excitation between flash and hair drier, the artificially samples have a better performance after heating by flash. So the flash excitation is better. After testing by different pollution on the surface, it can be concluded that different pollution don't have much influence on figuring out the structure or defect under the surface, only have some influence on heat diffusion. Then the defective composite insulators from work site are detected and the image of defect is clear. This new active thermography system can be detected quickly, efficiently and accurately, ignoring the influence of different pollution and other environmental restrictions. So it will have a broad prospect of figuring out the defeats and structure in composite insulators even other styles of insulators.

Nondestructive Testing Method of Post Porcelain Insulator Based on Pulsed Infrared Thermal Wave Technology

Nondestructive Testing of Porcelain Post Insulators Using Active Infrared Thermography

Detecting Defects in Porcelain Postinsulator Coated with Room Temperature Vulcanized Silicone Rubber by Pulsed Thermography.

Cracks Detection under Porcelain Post Insulator Flange by Pulsed Thermography

Pulsed Infrared Thermography to Inspect the Internal Defects of Composite Insulators

Feasibility Research of Defect Testing for Basin Insulator Based on Ultrasonic Guided Wave

Finite Element Simulation Analysis of Infrared Thermal Wave Detection on Composite Insulators

An Ultrasonic On-Line Test Method For Detecting Remotely And Automatically Energised Porcelain Post Insulators In High-Voltage Substations

Porcelain Insulator Crack Location and Surface States Pattern Recognition Based on Hyperspectral Technology

The application of terahertz technology in ultra high voltage large tonnage insulator detection

Research on Detection of Transmission Line Porcelain Insulator Based on Infrared Technology

Study on the Optical and Electrical Parameters of Porcelain Material Based on Terahertz Wave

Aminiaturized Device for Detecting Defects of Porcelain Insulators Based on High-Level Impulse Voltage Breakdown

Nondestructive Evaluation of Composite Bonding Structure Used in Electrical Insulation Based on Active Infrared Thermography

An Impulse Voltage-Based Compact Device for Porcelain Insulator Defect Detection

Detection of composite insulators inner defects based on flash thermography

Non-destructive Testing of Internal Defects in composite post insulators Using Microwave Technique

Microwave-based Non-destructive Testing Method on Composite Insulators

Detecting Breakage Defect of Post Insulator with Ultraviolet Imaging Method

Non-Destructive Testing of Internal Defects in Composite Insulators Using Microwave Technique

Numerical Analysis of Heat Transfer Process in Pulsed Thermography Detection on Electrical Ceramic Materials