Abstract:Usually, the air gap will appear inside the composite insulators and it will lead to serious accident. In order to detect these internal defects in composite insulators operated in the transmission lines, a new non-destructive technique has been proposed. In the study, the mathematical analysis model of the composite insulators inner defects, which is about heat diffusion, has been build. The model helps to analyze the propagation process of heat loss and judge the structure and defects under the surface. Compared with traditional detection methods and other non-destructive techniques, the technique mentioned above has many advantages In the study, air defects of composite insulators have been made artificially. Firstly, the artificially fabricated samples are tested by flash thermography, and this method shows a good performance to figure out the structure or defects under the surface. Compared the effect of different excitation between flash and hair drier, the artificially samples have a better performance after heating by flash. So the flash excitation is better. After testing by different pollution on the surface, it can be concluded that different pollution don't have much influence on figuring out the structure or defect under the surface, only have some influence on heat diffusion. Then the defective composite insulators from work site are detected and the image of defect is clear. This new active thermography system can be detected quickly, efficiently and accurately, ignoring the influence of different pollution and other environmental restrictions. So it will have a broad prospect of figuring out the defeats and structure in composite insulators even other styles of insulators.

Non-destructive Testing Method for Composite Insulators Based on Digital Shearography

Research on Internal Defect Detection of Epoxy Glass Fiber Composites Based on Terahertz Imaging Technology

Pulsed Infrared Thermography to Inspect the Internal Defects of Composite Insulators

Non-Destructive Testing Study of Hydrogen Storage COPVs Based on Digital Shearography Technique

Nondestructive Visualization and Quantitative Characterization of Defects in Silicone Polymer Insulators Based on Laser Shearography

Detection of composite insulators inner defects based on flash thermography

Feasibility Research of Defect Testing for Basin Insulator Based on Ultrasonic Guided Wave

Inspection of defects in composite structures using long pulse thermography and shearography

Detection of Internal Defects of Full-Size Composite Insulators Based on Microwave Technique

Non-Destructive Testing of Internal Defects in Composite Insulators Using Microwave Technique

Finite Element Simulation Analysis of Infrared Thermal Wave Detection on Composite Insulators

Nondestructive Evaluation of Composite Bonding Structure Used in Electrical Insulation Based on Active Infrared Thermography

Eddy Current Thermography for the Detection of Conductive Defects in Composite Insulators

Microwave-based Non-destructive Testing Method on Composite Insulators

Nondestructive Testing of Porcelain Post Insulators Using Active Infrared Thermography

Application of Ultrasonic Flaw Detector to Internal Defects in Composite Insulators

Transient thermal pattern separation and detection of conductive defects in composite insulators using eddy current pulsed thermography

Detection of Small Defects in Composite Insulators Using Terahertz Technique and Deconvolution Method

Ultrasonic Phased Array Detection of Internal Defects in Composite Insulators

Ultrasonic Detection and Diagnostic Method for the Internal Defects in Epoxy Composite

Microwave Reflection Method for Composite Insulator Internal Defect Detection