Abstract:The effect of severe warm-rolling on the microstructure and texture development in FCC equiatomic CoCrFeMnNi HEA was investigated in the present work. For this purpose, the HEA was warm-rolled to 90% reduction in thickness at 600 °C and annealed for 1 h at temperatures up to 1200 °C. To highlight the effect of warm-rolling, a critical comparison was made with similarly deformed and annealed cold-rolled HEA. The warm-rolled HEA showed an ultrafine lamellar microstructure, which was, however, significantly coarser than the cold-rolled HEA. The significantly coarser microstructure in the warm-rolled HEA could be attributed to the dynamic annihilation of dislocations during deformation. Warm-rolled HEA showed a pure metal or copper type texture instead of a predominantly brass type texture in the cold-rolled HEA. The stark differences in the deformation texture could be attributed to the increase in the SFE at the temperature of warm-rolling, which promoted more homogeneous deformation by dislocation slip over twin mediated deformation and extensive shear band formation. The lower stored energy and coarser deformation structure of the warm-rolled HEA resulted in higher recrystallization temperature, and consistently larger recrystallized grain size than the cold-rolled HEA. Annealing also resulted in the weakening of the recrystallization texture owing to the absence of strong preferential nucleation or growth. The HEA warm-rolled and annealed at 750 °C resulted in a fine-grained, completely recrystallized microstructure with the optimum strength-ductility combination. The present results revealed that warm-rolling could be effectively used as a processing route for tailoring microstructure and properties of CoCrFeMnNi HEA.

Effect of Warm Rolling on the Structure and Tensile Properties of a Metastable Fe-Based Medium Entropy Alloy

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

Effect of room temperature rolling and annealing on microstructure and mechanical properties of (CrCoNi) 96 V 4 medium entropy alloy

Severe warm-rolling mediated microstructure and texture of equiatomic CoCrFeMnNi high entropy alloy: A comparison with cold-rolling

Influence of annealing temperatures on the microstructure and deformation behavior of a CrCoNi based medium-entropy alloy

Effect of Annealing Treatment on the Heterogeneous Microstructure and Properties of Cold-Rolled FeCoCrNiMn High-Entropy Alloy

Effects of cold rolling and annealing treatment on microstructure and properties of CoFeNiMnV high‐entropy alloys

Studying the Effect of Cold Rolling and Heat Treatment on the Microstructure and Mechanical Properties of the Fe36Mn20Ni20Cr16Al5Si3 High Entropy Alloy

Effects of Thermo-mechanical Treatment on the Microstructures and Mechanical Properties of a Medium-Entropy Alloy

Deformation mechanism and mechanical properties of a CoCrFeNi high-entropy alloy via room-temperature rolling, cryorolling, and asymmetric cryorolling

Effects of cold-rolling and subsequent annealing on the nano-mechanical and creep behaviors of CrCoNi medium-entropy alloy

Microstructure and Mechanical Property Evolution during Annealing of a Cold-Rolled Metastable Powder Metallurgy High Entropy Alloy

Microstructure evolution and compressive properties of a low carbon-low alloy steel processed by warm rolling and subsequent annealing

Microstructure and Mechanical Properties Evolution of the Al, C-Containing CoCrFeNiMn-Type High-Entropy Alloy during Cold Rolling

Work hardening behavior of hot-rolled metastable Fe50Co25Ni10Al5Ti5Mo5 medium-entropy alloy: in situ neutron diffraction analysis

Phase reversion-induced heterogeneous structure in a ferrous medium-entropy alloy via cryorolling and annealing

Effect of Cold Rolling and Cryogenic Treatment on the Microstructure and Mechanical Properties of Fe–32Ni Alloy

Microstructure and Mechanical Properties of Medium Mn Steel Containing 3%al Processed by Warm Rolling

Improving Mechanical Properties of Fe-Mn-Co-Cr High-Entropy Alloy via Annealing after Cold Rolling

Effect of Annealing on Microstructure Evolution and Tensile Behavior of Hot-Rolled FeMnCoCrAl High-Entropy Alloy

Microstructure evolution and mechanical properties of metastable austenitic medium Mn steel fabricated by warm caliber rolling