Abstract:In this paper, we introduce a flexible and simple system calibration method for specular surface metrology based on the combination of reflection rays determined by the varied points on a screen and reflection images of a plane mirror without fiducials placed at three different locations. This calibration procedure involves three steps. The camera is first calibrated based on plane patterns. Then the reflection ray directions are measured via correspondence matching. The last calibration step is the pose estimation by the orthogonal iteration algorithm and reflections in a plane mirror. Basically, the concept of replacing the coordinates of the camera center with the reflection ray can alleviate the trouble of imaging aberration. Then global optimization can be operated with the orthogonal projection defined by the reflection ray, providing precise initial values for the process of bundle adjustment, compared to the classical calibration approach directly using the local optimization algorithm. Simulations and experiments both demonstrate the validity, efficiency, and robustness of the proposed improved method. In the simulations, the proposed method achieves the absolute errors of the camera parameters within 3 pixels and the relative errors of the screen pose are below 0.5% when the noise level is 0.6 pixel. Furthermore, the calibration method shows strong anti-noise ability, relying on the application of the reflection rays and the global optimization before the final bundle adjustment. In addition, the reconstruction accuracy in our experiment improves by 60.11% by the proposed method compared with the calibration procedure, which only utilizes the bundle adjustment optimization. In general, this novel calibration method can make the measurement achieve high accuracy and robustness at a low cost and with a simple setup, providing an efficient, economical, and flexible approach for a phase measuring deflectometry system in practical situations.

Full-aperture surface reconstruction method for shift-rotation absolute measurement with tilt error suppression

Misalignment Correction for Free-Form Surface in Non-Null Interferometric Testing

Error impact analysis and experimental research for absolute testing of spherical surfaces

Error Analysis Of Spherical Ultra-Precision Measurement

Elimination of reference surface error on high-accuracy subaperture stitching

Aspheric and Free-Form Surfaces Test with Non-Null Sub-Aperture Stitching

Fast measurement spherical surface and fast patching up aspherical surface

Aberration Calibration in High-Na Spherical Surfaces Measurement on Point Diffraction Interferometry

Research on Two Optical Methods for Aspheric Measurement

Method of Two-position Spherical Testing

Reverse Optimization Reconstruction Method in Non-Null Aspheric Interferometry

Accurate Reconstruction for the Measurement of Tilt Surfaces with Digital Holography

Air Flow Turbulence Orthogonality and Surface Error Estimation in Large Aperture Optical Testing

Interferometric Spherical Surface Testing with Unknown Phase Shifts

Improving the Accuracy of Interferometer Testing with Absolute Surface Calibration and Power Spectral Density Analysis

The shift–rotation absolute testing method based on autocollimation

In-situ Sub-Aperture Stitching Measurement Based on Monoscopic Phase Measuring Deflectometry

Precise Two-Dimensional Tilt Measurement Sensor with Double-Cylindrical Mirror Structure and Modified Mean-Shift Algorithm for a Confocal Microscopy System

Full Area Covered 3D Profile Measurement of Special-Shaped Optics Based on a New Prototype Non-Contact Profiler.

Improved System Calibration for Specular Surface Measurement by Using Reflections from a Plane Mirror.

Method for testing freeform surfaces based on a Shack-Hartmann sensor with plane wavefront scanning and stitching