Abstract:Highlights • Highly oriented Bi(Te, Se)-based thin films are prepared via PLD technology. • Remarkable average PF (∼24.4 μW cm −1 ·K −2 ) and estimated- zT (∼0.81) are achieved in the films. • The maximum output power density of the film device reaches up to ∼30.1 W/m 2 . Bi(Te, Se)-based compounds have attracted lots of attention for nearly two centuries as one of the most successful commercial thermoelectric (TE) materials due to their high performance at near room temperature. Compared with 3D bulks, 2D thin films are more compatible with modern semiconductor technology and have unique advantages in the construction of micro- and nano-devices. For device applications, high average TE performance over the entire operating temperature range is critical. Herein, highly c -axis-oriented N-type Bi(Te, Se) epitaxial thin films have been successfully prepared using the pulsed laser deposition technology by adjusting the deposition temperature. The film deposited at ∼260 °C demonstrate a remarkable average power factor (PF ave ) of ∼24.4 μW cm −1 ·K −2 over the temperature range of 305–470 K, higher than most of the state-of-the-art Bi(Te, Se)-based films. Moreover, the estimated average zT value of the film is as high as ∼0.81. We then constructed thin-film TE devices by using the above oriented Bi(Te, Se) films, and the maximum output power density of the device can reach up to ∼30.1 W/m 2 under the temperature difference of 40 K. Predictably, the outstanding average TE performance of the highly oriented Bi(Te, Se) thin films will have an excellent panorama of applications in semiconductor cooling and power generation. Graphical abstract Download : Download high-res image (225KB) Download : Download full-size image

High thermoelectric performance achieved in Bi0.4Sb1.6Te3 films with high (00l) orientation via magnetron sputtering

Synergistic Texturing and Bi/Sb‐Te Antisite Doping Secure High Thermoelectric Performance in Bi 0.5 Sb 1.5 Te 3 ‐Based Thin Films

Carrier concentration and orientation optimization for high performance (Sb,Bi) 2 Te 3 thermoelectric films via magnetron co-sputtering

Optimizing the thermoelectric properties of flexible Bi[math]Sb[math]Te[math] thin films via modulating magnetron sputtering power

Thermoelectric properties of p-type Bi-=SUB=-0.5-=/SUB=-Sb-=SUB=-1.5-=/SUB=-Te-=SUB=-3-=/SUB=- films on flexible substrate

High Thermoelectric Performance of p-Type Bi0.4Sb1.6Te3+ x Synthesized by Plasma-Assisted Ball Milling

Thermoelectric performance of p-type (Bi,Sb)2Te3 incorporating amorphous Sb2S3 nanospheres

Unraveling electronic origins for boosting thermoelectric performance of p-type (Bi,Sb) 2 Te 3

Enhanced power factor of Bi<sub>0.5</sub>Sb<sub>1.5</sub>Te<sub>3</sub> thin films via PbTe incorporating and annealing

Controlling the shape of hexagonal structure by growth condition improves the thermoelectric properties of p-type Bi-Te films

Improving the thermoelectric performance of p-type (Bi x Sb 1− x ) 2 Te 3 thin films via tuning the Bi x Sb 1− x layer

Enhanced Thermoelectric Properties of p-Type Bi 0.48 Sb 1.52 Te 3 /Sb 2 Te 3 Composite

Anisotropic thermoelectric transport properties of Bi0.5Sb1.5Te2.96+x zone melted ingots

Ultrahigh Power Factor of Sputtered Nanocrystalline N-Type Bi2Te3 Thin Film via Vacancy Defect Modulation and Ti Additives

Characterization of Magnetron Sputtered BiTe-Based Thermoelectric Thin Films

Ti-doping inducing high-performance flexible p-type Bi0.5Sb1.5Te3-based thin film

In situ crystal-amorphous compositing inducing ultrahigh thermoelectric performance of p-type Bi0.5Sb1.5Te3 hybrid thin films

Achieving High Thermoelectric Performance in Bi2(Te, Se)3 Thin Film with (00 l)-Oriented by Incorporating Tellurization and Selenization Processes

Remarkable average thermoelectric performance of the highly oriented Bi(Te, Se)-based thin films and devices

Enhancement of ZT in Bi0.5Sb1.5Te3 Thin Film through Lattice Orientation Management

Broadening the optimum thermoelectric power generation range of p-type sintered Bi0.4Sb1.6Te3 by suppressing bipolar effect