Abstract:A new structure of p-GaN/InGaN heterojunction has been proposed to enhance hole injection for blue GaN-based light-emitting diodes (LEDs). It is demonstrated by the simulation results that a p-GaN (50 nm)/In0.05Ga0.95N (150 nm) heterojunction can make a 25% and 10% increment of hole and electron concentration in the active region, respectively, finally resulting in a 55% improvement on the LED's radiative recombination intensity. The simulation also reveals that the efficiency droop is alleviated from 32.9% to 21.7% at the current density of 100 A cm(-2). The enhanced hole injection is mainly attributed to the increased average background hole concentration of the area between the p-AlGaN electron blocking layer (EBL) to the p-GaN/InGaN heterojunction. The increasing potential barrier of the conduction band, resulting from the introduction of p-GaN/InGaN heterojunction, would also weaken electron leakage and is favorable to the LED's luminous performance. The experimental results show that the wall-plug efficiency (WPE) of the p-GaN/InGaN LED increases by 26.0% at the injection current of 75 mA, in spite of the increasing electric resistance, which impairs the improvement of the LED's performance from the enhanced hole injection. The structure of the p-GaN/InGaN heterojunction is novel in the field of p-type region design, and is a simple but effective way to promote the LED's performance, which is very promising for application in further high-performance LED fabrication.

Origin of GaN-InGaN-GaN barriers in enhancing the hole injection for InGaN/GaN green light-emitting diodes

Enhancing the Performance of GaN-Based Light-Emitting Diodes by Incorporating a Junction-Type Last Quantum Barrier

A new structure of p-GaN/InGaN heterojunction to enhance hole injection for blue GaN-based LEDs

The Influence of InGaN Interlayer on the Performance of InGaN/GaN Quantum-Well-Based LEDs at High Injections

Effect of Si Doping in Barriers of Ingan/Gan Multiple Quantum Wells on the Performance of Green Light-Emitting Diodes

Boosting Green GaInN/GaN Light-Emitting Diode Performance by a GaInN Underlying Layer

Effect of Hole Blocking Layer on V-pit Hole Injection and Internal Quantum Efficiency in GaN-based Yellow LED

Design Considerations for GaN-Based Blue Laser Diodes with InGaN Upper Waveguide Layer

Improvement of Electrostatic Discharge Characteristics of InGaN/GaN MQWs Light-Emitting Diodes by Inserting an N+-Ingan Electron Injection Layer and a P-Ingan/gan Hole Injection Layer

InGaN multiple quantum well based light-emitting diodes with indium composition gradient InGaN quantum barriers

Enhanced Hole Injection in AlGaN-Based Ga-Polar Ultraviolet Light-Emitting Diodes with Polarized Electric-Field Reservoir Electron Barrier

Quantum Efficiency Enhancement of a GaN-Based Green Light-Emitting Diode by a Graded Indium Composition p-Type InGaN Layer

Performance Improvement of InGaN Red Light‐Emitting Diode by Using V‐Pits Layer and Step‐Graded GaN Barrier

Ingan/Gan Multilayer Quantum Dots Yellow-Green Light-Emitting Diode with Optimized Gan Barriers

Optimization Design of Quantum Barrier of InGaN Quantum Well in Blue Light-Emitting Diode

Enhancing the Blue GaN Laser Diodes by Modifying the First Barrier Structure and Adjusting the Growth Conditions of Quantum Wells

Enhanced Performance of GaN Based Light-Emitting Diodes with a Low Temperature P-Gan Hole Injection Layer

Utilization of Polarization-Inverted Alingan or Relatively Thinner Algan Electron Blocking Layer in Ingan-Based Blue-Violet Laser Diodes

Effects of InGaN Barriers with Low Indium Content on Internal Quantum Efficiency of Blue InGaN Multiple Quantum Wells

Performance Enhancement of Nitrogen-Polar GaN-based Light-Emitting Diodes Prepared by Metalorganic Chemical Vapor Deposition

Internal quantum efficiency improvement of InGaN/GaN multiple quantum well green light-emitting diodes