Abstract:High-gain materials and high-quality structures are the two main conditions that determine the amplification performance of optical waveguides. However, it has been hard to balance each other, to date. In this work, we demonstrate breakthroughs in both glass optical gain and optical waveguide structures. We propose a secondary melting dehydration technique that prepares high-quality Er3+-Yb3+ co-doped phosphate glass with low absorption loss. Additionally, we propose a femtosecond laser direct-writing technique that allows controlling the cross section, size, and mode field of waveguides written in glass with high accuracy, leveraging submicron-resolution multi-scan direct-writing optical waveguide technology, which is beneficial for reducing insertion loss. As a proof of concept demonstration, we designed and fabricated two kinds of waveguides, namely, LP01- and LP11-mode waveguides in the Er3+-Yb3+ co-doped phosphate glass, enabling insertion loss as low as 0.9 dB for a waveguide length of 2 mm. Remarkably, we successfully achieved an optical amplification for both the waveguides with a net gain of >7 dB and a net-gain coefficient of >3.5 dB/mm, which is approximately one order of magnitude larger than that in the Er3+-Yb3+ co-doped phosphate glass fabricated by the traditional melt-quenching method. This will open new avenues toward the development of integrated photonic chips. (c) 2023 Optica Publishing Group

On-chip Er-doped Ta_2O_5 waveguide amplifiers with a high internal net gain

On-chip Er-doped Ta2O5 waveguide amplifiers with a high internal net gain

Er–Tm co-doped materials for on-chip ultra-broadband waveguide amplifier

High on-chip gain spiral Al2O3:Er3+ waveguide amplifiers

Toward a10 dB net-gain waveguide amplifier in an Er3+-Yb3+ co-doped phosphate glass

Toward a 10 Db Net-Gain Waveguide Amplifier in an Er3+-Yb3+ Co-Doped Phosphate Glass

Erbium-doped Ga2O3 waveguide for optical amplification

Synthesis and study of novel erbium-doped La2O3-Al2O3 glasses for on-chip waveguide amplifier

A high-gain cladded waveguide amplifier on erbium doped thin-film lithium niobate fabricated using photolithography assisted chemo-mechanical etching

On-chip Integrated Few-Mode Erbium–ytterbium Co-Doped Waveguide Amplifiers

High-gain Erbium Silicate Waveguide Amplifier and a Low-Threshold, High-Efficiency Laser.

On-chip erbium-doped lithium niobate waveguide amplifiers

Strip loaded waveguide amplifiers based on erbium-doped nanocomposites with 17 dB internal net gain

Erbium-Ytterbium Co-doped Tantalum Pentoxide As a Gain Material for Silicon-based Optoelectronics

A Semi-Weakly Confined Erbium-Doped Waveguide Amplifier with Double-Layered Buffer/cladding.

Erbium-ytterbium codoped thin-film lithium niobate integrated waveguide amplifier with a 27 dB internal net gain

Study on Er3+-Yb3+ co-doped La2O3–Al2O3 glasses for C-band optical waveguide amplifier with high luminous efficiency and low pump threshold

A Low-Fabrication-Temperature Erbium-Based Waveguide Amplifier

Gain enhancement technique for S-band polymer-based waveguide amplifiers

Design of a broadband Si_3N_4 waveguide amplifier based on a gain medium of ion-sliced titanium-doped sapphire

High-Extraction-Rate Ta2O5-Core/SiO2-Clad Photonic Waveguides on Silicon Fabricated by Photolithography-Assisted Chemo-Mechanical Etching (PLACE)