Abstract:Based on the intramolecular energy transfer, relative gains of 10.5 and 8.5 dB cm−1 at 1535 and 1550 nm respectively are demonstrated in ErIII coordination polymer [Er(DBTTA)3(FDPO)]n‐doped waveguides under excitations of light‐emitting diode instead of laser pumping. This study is expected to achieve the application of polymer waveguide amplifiers in planar photonic integration and facilitate low‐cost packaging of the waveguide and pump sources. 9,9‐bis (diphenylphosphorylphenyl) fluorene (FDPO) and dibenzotetrathienoacene (DBTTA), are synthesized as the neutral and anionic ligands, respectively, to prepare the ErIII coordination polymer [Er(DBTTA)3(FDPO)]n. Based on the intramolecular energy transfer, optical gains at 1.5 μm are demonstrated in [Er(DBTTA)3(FDPO)]n‐doped polymer waveguides under excitations of low‐power light‐emitting diodes (LEDs) instead of laser pumping. A ligand‐sensitization scheme between organic ligands and Er3+ ions under an excitation of an ultraviolet (UV) LED is established. Relative gains of 10.5 and 8.5 dB cm−1 are achieved at 1.53 and 1.55 μm, respectively, on a 1‐cm‐long SU‐8 channel waveguide with a cross‐section of 2 × 3 μm2 and a 1.5‐μm‐thick [Er(DBTTA)3(FDPO)]n‐doped polymethylmethacrylate (PMMA) as upper cladding. The ErIII coordination polymer [Er(DBTTA)3(FDPO)]n can be conveniently integrated with various low‐loss inorganic waveguides to compensate for optical losses in the C‐band window. Moreover, by relying on the intramolecular energy transfer and UV LED top‐pumping technology, it is easy to achieve coupling packaging of erbium‐doped waveguide amplifiers (EDWAs) with pump sources in planar photonic integrated chips, effectively reducing the commercial costs.

Er–Tm co-doped materials for on-chip ultra-broadband waveguide amplifier

Study on Er3+-Yb3+ co-doped La2O3–Al2O3 glasses for C-band optical waveguide amplifier with high luminous efficiency and low pump threshold

Synthesis and study of novel erbium-doped La2O3-Al2O3 glasses for on-chip waveguide amplifier

Toward a10 dB net-gain waveguide amplifier in an Er3+-Yb3+ co-doped phosphate glass

A low-fabrication-temperature, high-gain chip-scale waveguide amplifier

Toward a 10 Db Net-Gain Waveguide Amplifier in an Er3+-Yb3+ Co-Doped Phosphate Glass

A Low-Fabrication-Temperature Erbium-Based Waveguide Amplifier

High-gain Erbium Silicate Waveguide Amplifier and a Low-Threshold, High-Efficiency Laser.

A strategy for preparing broadband polymer based optical waveguide amplifiers: doping low crystal field symmetric nanocrystals in polymer matrix as gain media

Erbium Silicate Compound Optical Waveguide Amplifier and Laser [Invited]

Erbium-doped Ga2O3 waveguide for optical amplification

On-chip Er-doped Ta_2O_5 waveguide amplifiers with a high internal net gain

On-chip Er-doped Ta2O5 waveguide amplifiers with a high internal net gain

Erbium-ytterbium co-doped aluminium oxide waveguide amplifiers fabricated by reactive co-sputtering and wet chemical etching

Net gain in C+L band from LED pumped broadband emission in Er3+-doped oxyhalide tellurite glass

Improving extended L-band fiber amplifiers using Er 3+ : Y 3+ co-doped silicate with optimized alumino-phospho-silicate glass matrix

High on-chip gain spiral Al2O3:Er3+ waveguide amplifiers

Optical Amplification at 1.5 μm in ErIII Coordination Polymer‐Doped Waveguides Based on Intramolecular Energy Transfer

Broadband near-infrared emission property in Er3+/Ce3+ co-doped silica-germanate glass for fiber amplifier

Er 3+ ‐doped antimony‐silica glass and fiber for broadband optical amplification

High-order mode waveguide amplifier with high mode extinction ratio written in an Er3+-doped phosphate glass