Abstract:Erbium doped materials are of great interest in optical telecommunications due to the Er3+ intra-4f emission at 1.54 ?m. Erbium doped fibre amplifiers (EDFA) were developed in silica glass because of the low losses at this wavelength and the reliability of this glass. Developments of new rare earth doped fibre amplifiers aim to control their spectroscopic properties including shape and width of the gain curve and optical quantum efficiency. Standard silica glass modifiers, such as aluminium, result in very good properties in current EDFA. However, for more drastic spectroscopic changes, more important modifications of the rare earth ions local environment are required. To address this aim, we present a fibre fabrication route creating rare earth doped calcia?silica or calcia?phosphosilica nanoparticles embedded in silica glass. By adding alkaline earth elements such as calcium, in low concentration, one can obtain a glass with an immisci- bility gap so that phase separation occurs with an appropriate heat treatment. We investigated the role of two elements: calcium and phosphorus (a standard silica modifier). Scanning electron microscopy shows that nanoparticles are only observed when calcium is incorporated. The size of the particles is determined to be around 50 nm in preform samples. The nature of these particles depends on phosphorus content: without P, electron diffraction shows that the particles are amorphous whilst they are partially crystalline when phosphorus is added. In addition through use of energy dispersive x-ray techniques, we have shown that erbium ions are located in the nanoparticles.

Improving extended L-band fiber amplifiers using Er 3+ : Y 3+ co-doped silicate with optimized alumino-phospho-silicate glass matrix

PbSe Quantum-Dot-doped Broadband Fiber Amplifier Based on Sodium-Aluminum-borosilicate-silicate Glass

High-efficiency cladding-pumped Er/Yb co-doped alumino-phosphosilicate fiber for an extended L-band amplification

Study on Er3+-Yb3+ co-doped La2O3–Al2O3 glasses for C-band optical waveguide amplifier with high luminous efficiency and low pump threshold

Optical properties of Er3+ doped alkali-chloro phosphate glasses for optical amplifiers

Toward a 10 Db Net-Gain Waveguide Amplifier in an Er3+-Yb3+ Co-Doped Phosphate Glass

Er 3+ ‐doped antimony‐silica glass and fiber for broadband optical amplification

A strategy for preparing broadband polymer based optical waveguide amplifiers: doping low crystal field symmetric nanocrystals in polymer matrix as gain media

Design optimization for efficient erbium-doped fiber amplifiers

Toward a10 dB net-gain waveguide amplifier in an Er3+-Yb3+ co-doped phosphate glass

Broadband near-infrared emission property in Er3+/Ce3+ co-doped silica-germanate glass for fiber amplifier

Er 3+ /Ce 3+ Co-doped Phosphosilicate Fiber for Extend the L-band Amplification

Net gain in C+L band from LED pumped broadband emission in Er3+-doped oxyhalide tellurite glass

Er–Tm co-doped materials for on-chip ultra-broadband waveguide amplifier

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

Fabrication and Characterization of Er~(3+):Yb~(3+) Co-doped Phosphosilicate Fibers

Er doped oxide nanoparticles in silica based optical fibres

Er3+/Yb3+ Co-Doped Fluorotellurite Glass Fiber with Broadband Luminescence

Characterization of sub-nanosecond pulsed laser amplification with Er:Yb co-doped phosphate glass fibers

Synthesis and study of novel erbium-doped La2O3-Al2O3 glasses for on-chip waveguide amplifier

Visible-infrared optical performance of Er3+-doped fluorotellurite glass via hybrid structural fluctuations