Abstract:Based on the intramolecular energy transfer, relative gains of 10.5 and 8.5 dB cm−1 at 1535 and 1550 nm respectively are demonstrated in ErIII coordination polymer [Er(DBTTA)3(FDPO)]n‐doped waveguides under excitations of light‐emitting diode instead of laser pumping. This study is expected to achieve the application of polymer waveguide amplifiers in planar photonic integration and facilitate low‐cost packaging of the waveguide and pump sources. 9,9‐bis (diphenylphosphorylphenyl) fluorene (FDPO) and dibenzotetrathienoacene (DBTTA), are synthesized as the neutral and anionic ligands, respectively, to prepare the ErIII coordination polymer [Er(DBTTA)3(FDPO)]n. Based on the intramolecular energy transfer, optical gains at 1.5 μm are demonstrated in [Er(DBTTA)3(FDPO)]n‐doped polymer waveguides under excitations of low‐power light‐emitting diodes (LEDs) instead of laser pumping. A ligand‐sensitization scheme between organic ligands and Er3+ ions under an excitation of an ultraviolet (UV) LED is established. Relative gains of 10.5 and 8.5 dB cm−1 are achieved at 1.53 and 1.55 μm, respectively, on a 1‐cm‐long SU‐8 channel waveguide with a cross‐section of 2 × 3 μm2 and a 1.5‐μm‐thick [Er(DBTTA)3(FDPO)]n‐doped polymethylmethacrylate (PMMA) as upper cladding. The ErIII coordination polymer [Er(DBTTA)3(FDPO)]n can be conveniently integrated with various low‐loss inorganic waveguides to compensate for optical losses in the C‐band window. Moreover, by relying on the intramolecular energy transfer and UV LED top‐pumping technology, it is easy to achieve coupling packaging of erbium‐doped waveguide amplifiers (EDWAs) with pump sources in planar photonic integrated chips, effectively reducing the commercial costs.

Design optimization for efficient erbium-doped fiber amplifiers

Optimal design of Er/Yb co-doped fiber amplifiers with an Yb-band fiber Bragg grating

Theoretical and Experimental Investigations on Erbium-Doped Fiber Amplifiers

Improving extended L-band fiber amplifiers using Er 3+ : Y 3+ co-doped silicate with optimized alumino-phospho-silicate glass matrix

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

Amplification Properties of Erbium-Doped Solid-Core Photonic Bandgap Fibers

Experimental study of two-stage erbium doped fiber amplifiers pumped by 980 nm and 1480nm LD

Optical Amplification at 1.5 μm in ErIII Coordination Polymer‐Doped Waveguides Based on Intramolecular Energy Transfer

Optimally Gain-Flattened and Dispersion-Managed C + L-band Hybrid Amplifier Using a Single-Wavelength Pump Laser

A Numerical Method for Solving Gain Characteristics of Er3+/Yb3+ Codoped Waveguide Amplifiers

Modeling of optical amplifier waveguide based on silicon nanostructures and rare earth ions doped silica matrix gain media by a finite-difference time-domain method: comparison of achievable gain with Er3+ or Nd3+ ions dopants

Modal gain characteristics of few-mode erbium-doped fiber amplifiers with pump mode beating

Design of Raman-Parametric Fiber Amplifier for Wavelength Division Multiplex Transmission System

A strategy for preparing broadband polymer based optical waveguide amplifiers: doping low crystal field symmetric nanocrystals in polymer matrix as gain media

High-efficiency cladding-pumped Er/Yb co-doped alumino-phosphosilicate fiber for an extended L-band amplification

Pump Laser Automatic Signal Control for Erbium-Doped Fiber Amplifier Gain, Noise Figure, and Output Spectral Power

Ion-Exchanged Silica-On-Silicon Structured Channel Erbium-Doped Waveguide Amplifiers

Low-modal-crosstalk Doped-Fiber Amplifiers in Few-Mode Fiber-Based Systems

FDTD modeling of excitation-balanced, mJ-level pulse amplifiers in Yb-doped double-clad optical fibers

Ultra-Low Noise Figure in Optical Fiber Amplifier by Tailoring the Mode Field Profile of Erbium-Doped Fiber

Highly efficient Er/Yb-codoped fiber amplifier with an Yb-band fiber Bragg grating.