Abstract:High-gain materials and high-quality structures are the two main conditions that determine the amplification performance of optical waveguides. However, it has been hard to balance each other, to date. In this work, we demonstrate breakthroughs in both glass optical gain and optical waveguide structures. We propose a secondary melting dehydration technique that prepares high-quality Er3+-Yb3+ co-doped phosphate glass with low absorption loss. Additionally, we propose a femtosecond laser direct-writing technique that allows controlling the cross section, size, and mode field of waveguides written in glass with high accuracy, leveraging submicron-resolution multi-scan direct-writing optical waveguide technology, which is beneficial for reducing insertion loss. As a proof of concept demonstration, we designed and fabricated two kinds of waveguides, namely, LP01- and LP11-mode waveguides in the Er3+-Yb3+ co-doped phosphate glass, enabling insertion loss as low as 0.9 dB for a waveguide length of 2 mm. Remarkably, we successfully achieved an optical amplification for both the waveguides with a net gain of >7 dB and a net-gain coefficient of >3.5 dB/mm, which is approximately one order of magnitude larger than that in the Er3+-Yb3+ co-doped phosphate glass fabricated by the traditional melt-quenching method. This will open new avenues toward the development of integrated photonic chips. (c) 2023 Optica Publishing Group

Strip loaded waveguide amplifiers based on erbium-doped nanocomposites with 17 dB internal net gain

Optical Amplification in Er/Yb Silicate Strip Loaded Waveguide

Gain enhancement technique for S-band polymer-based waveguide amplifiers

High-gain Erbium Silicate Waveguide Amplifier and a Low-Threshold, High-Efficiency Laser.

On-chip Er-doped Ta_2O_5 waveguide amplifiers with a high internal net gain

Erbium-ytterbium codoped thin-film lithium niobate integrated waveguide amplifier with a 27 dB internal net gain

Erbium-ytterbium codoped thin-film lithium niobate integrated waveguide amplifier with 27 dB internal net gain

Toward a10 dB net-gain waveguide amplifier in an Er3+-Yb3+ co-doped phosphate glass

A short high-gain waveguide amplifier based on low concentration erbium-doped thin-film lithium niobate on insulator

Toward a 10 Db Net-Gain Waveguide Amplifier in an Er3+-Yb3+ Co-Doped Phosphate Glass

Dye Gain Gold NW Array of Surface Plasmon Polariton Waveguide

Efficient erbium-doped thin-film lithium niobate waveguide amplifiers

On-chip erbium-doped lithium niobate waveguide amplifiers

Er Silicate Amplifers and Lasers for Silicon Photonics

Boosting the Downconversion Luminescence of Tm 3+ -Doped Nanoparticles for S-Band Polymer Waveguide Amplifier

A strategy for preparing broadband polymer based optical waveguide amplifiers: doping low crystal field symmetric nanocrystals in polymer matrix as gain media

A high-gain cladded waveguide amplifier on erbium doped thin-film lithium niobate fabricated using photolithography assisted chemo-mechanical etching

Highly efficient on-chip erbium-ytterbium co-doped lithium niobate waveguide amplifiers

Erbium Silicate Compound Optical Waveguide Amplifier and Laser [Invited]

Integrated spiral waveguide amplifiers on erbium-doped thin-film lithium niobate

Design of a broadband Si_3N_4 waveguide amplifier based on a gain medium of ion-sliced titanium-doped sapphire