Abstract:Eutrophication-induced ocean acidification is causing a dramatic ecologic change in the coastal ocean. A more acidic ocean would lead to more volatile H 2 S in the coastal ocean, especially in the area where shallow hydrothermal vents exist. Therefore, the early detection of H 2 S and its associates is needed. In this study, the preparation method for and the detection limit of an Ag/Ag 2 S electrode were optimized by coating the electrode with micro-scale to nano-scale silver particles. The size of the silver particles was dependent on the electroplating power used to produce them: (1) direct current power made micrometer scale silver particles, and (2) direct current carrier power made nano-scale silver particles. As a result, the detection limits of [S 2− ] of the Ag/Ag 2 S electrode made using direct current and direct carrier current were improved to 1×10 −5 mol L −1 and 1×10 −7 mol L −1 , respectively. Such improvements were mostly due to the fact that nano silver particles have larger surface area and higher surface energy. The Ag/Ag 2 S electrode made by direct carrier current method was then mounted to a multi-parameter sensor (including a pH and an Eh electrode) used to search of new hydrothermal vents near the Kueishan Tao in May, 2011. A new hydrothermal vent was discovered based on pH, Eh and H 2 S anomalies at three depths. A clear [S 2− ] signal anomaly was observed from the top sensor indicating the dispersive pattern of the hot fluid near this shallow vent site. This could also provide additional information on the dispersion pattern of anthropogenic pollutants in the coastal ocean.

Preparation and application of Cu-doped antimony electrode to improve the performance of pH measurement in seawater

Capillary Melt Method for Micro Antimony Oxide pH Electrode

An Antimony Oxide Ph Electrode for Tissue Culture Medium

A New Electroplated Ir/Ir（OH） X Ph Electrode and Its Application in the Coastal Areas of Newport Harbor, California

Development of SPEEK-Coated IrOx Sensor for High-Biomass Aquatic Ph Monitoring

In-situ graphene modified self-supported boron-doped diamond electrode for Pb(II) electrochemical detection in seawater

The Optimization of Ag/Ag2s Electrode Using Carrier Electroplating of Nano Silver Particles and Its Preliminary Application to Offshore Kueishan Tao, Taiwan

A Novel Chemical Sensor with Multiple All-Solid-state Electrodes and Its Application in Freshwater Environmental Monitoring.

Silver Co-Doping Effect on the Antimony Doped Tin Dioxide Electrode

IN-SITU DETECTION OF HEAVY METAL POLLUTION IN SEAWATER WITH DIAMOND COATED ELECTRODES

Preparation and Characterization of Pbo2 Electrodes from Electro-Deposition Solutions with Different Copper Concentration

Modification of Ti/Sb-SnO2/PbO2 Electrode by Active Granules and Its Application in Wastewater Containing Copper Ions

S and Co co-doped Cu 3 P nanowires self-supported on Cu foam as an efficient hydrogen evolution electrocatalyst in artificial seawater

Ultra-sensitive simultaneous electrochemical detection of Zn(II), Cd(II) and Pb(II) based on the bismuth and graphdiyne film modified electrode

Doping modification, defects construction, and surface engineering: Design of cost-effective high-performance electrocatalysts and their application in alkaline seawater splitting

Synthesis of Bismuth Film Assembly on Flexible Carbon Cloth for the Electrochemical Detection of Heavy Metal Ions

Stable, high-performance, dendrite-free, seawater-based aqueous batteries

High-kinetic and stable antimony anode enabled by tuning coordination environment for ultrafast aqueous energy storage

Determination of Trace Lead and Cadmium in Water by Stripping Voltammetry with a Copper-Based Composite Antimony Film Electrode

Electrodeposited Palladium Nanoparticles Enhancing Atomic Hydrogen-Mediated Electrochemical Recovery of Antimony

A high-durability aqueous Cu-S battery assisted by pre-copper electrochemistry