Abstract:Bi3+ doped Ti/Sb-SnO2/PbO2 electrode materials were fabricated by electrodeposition to improve their electrochemical performance in zinc electrowinning. The surface morphology, chemical composition, and hydrophilicity of the as-prepared electrodes were characterized using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and contact angle. An electrochemical measurement and an accelerated lifetime experiment were also conducted to investigate the electrocatalytic performance and stability of the electrodes. The results show that the Bi3+ modification electrode has an important effect on the coating morphology, the crystal structure, the surface hydrophilicity, the electrocatalytic activity, and the stability. The electrode prepared from the solution containing 2 mmol·L−1 Bi(NO3)3 (marked as the Ti/Sb-SnO2/2Bi-PbO2 electrode) exhibits the best hydrophilicity performance (θ = 21.6°) and the longest service life (1196 h). During the electrochemical characterization analysis, the Ti/Sb-SnO2/2Bi-PbO2 electrode showed the highest oxygen evolution activity, which can be attributed to it having the highest electroactive surface (qT* = 21.20 C·cm−2) and the best charge-transfer efficiency. The DFT calculation demonstrated that the doping of Bi3+ leads to a decrease in the OER reaction barrier and an increase in the DOS of the electrode, which further enhances the catalytic activity and the conductivity of the electrode. Moreover, the simulated zinc electrowinning experiment demonstrated that the Ti/Sb-SnO2/2Bi-PbO2 electrode consumes less energy than other electrodes. Therefore, it is expected that the Bi3+ modified electrode will become a very promising electrode material for zinc electrowinning in the future.

Silver Co-Doping Effect on the Antimony Doped Tin Dioxide Electrode

Dye wastewater treatment using self-made Nd doped Ti/SnO2-Sb electro-catalytic electrodes

Variable Temperature Spectroelectrochemistry Study of Silver-Doped Tio2 and Its Influence on the Performance of Dye Sensitized Solar Cells

Influences of Tin Oxide Surface Modification on the Morphology and Performance of Sintered Ag/SnO2 Composite Powders

Effect of Drying Periods on Antimony-Doped Tin Dioxide-Coated Titanium Electrode

EFFECTS OF DOPING RATE AND TREATMENT TEMPERATURE ON ELECTRICAL PROPERTIES AND STRUCTURE OF ANTIMONY DOPED TIN OXIDE

Modification of Ti/Sb-SnO2/PbO2 Electrode by Active Granules and Its Application in Wastewater Containing Copper Ions

Influence of Silver Doping on Photocatalytic Activity of Liquid Flame Sprayed Nanostructured TiO2 Coating

Influence of Bi3+ Doping on Electrochemical Properties of Ti/Sb-SnO2/PbO2 Electrode for Zinc Electrowinning

Effects of Rare Earth Doping on Structural and Electrocatalytic Properties of Nanostructured TiO2 Nanotubes/SnO2-Sb Electrode for Electrochemical Treatment of Industrial Wastewater

Characterization of Nickel-Bismuth Doped Tin Dioxide Electrode

Preparation and Characterization of Dy Doped Ti-base SnO_2/Sb Electro-catalytic Electrodes

Effects of Doping Ratio and Calcinations on Structure and Electrical Conductivity of Antimony Doped Tin Oxide

Preparation of porous CuS/modified-diatomite composite via a facile in situ loading process for efficient recovery of silver ion from aqueous solution

Characterization of Nickel-Antimony Doped Tin Oxide Electrodes Prepared Via Sol-Gel Dip-Coating Method

Tin-Antimony/Carbon Composite Porous Fibers: Electrospinning synthesis and Application in Sodium-Ion Batteries

Preparation of Yb-Sb co-doped Ti/SnO2 electrode for electrocatalytic degradation of sulfamethoxazole (SMX)

Influence of 1,8-Naphthalimide Derivatives As Additives on the Electrodeposition of Tin from Methanesulfonic Acid System

Fabrication and Excellent Conductive Performance of Antimony-Doped Tin Oxide-Coated Diatomite with Porous Structure

The Effect of Different Dopants on the Performance of SnO2‐based Dye‐sensitized Solar Cells

Antimony and Cerium Co-Doped Tin Oxide Electrodes for Pollutant Degradation