Abstract:Pure and tin-incorporated TiO2 (Sn-TiO2) nanoparticles were prepared utilizing photolysis method. Field emission-scanning electron microscope (FESEM) and transmission electron microscopy (TEM) reveal the formation of fusiform and spherical agglomeration nanoparticles with mesoporous structure and size that is equal to 20 nm approximately. The preparation of 5%Sn:TiO2 is confirmed by energy dispersive X-ray (EDX), and the empirical formal is Sn0.05TiO4. X-ray diffraction (XRD) studies confirm that they have a 4 nm crystallite size and crystallized as an anatase phase of TiO2. X-ray photoelectron spectroscopy (XPS) revealed that 1% Sn4+ was successfully incorporated with TiO2 and that Ti3+ is presented as an electron trap. Raman spectrum shows a higher shift of TiO2 peaks with in Sn:TiO2. The band gap decreases with increasing Sn4+ incorporating ratio and reaching a minimum value of 2.62 eV corresponding to 5% Sn:TiO2, as well as the adsorption spectrum of Sn4+-incorporated TiO2 has an excellent transmittance with increasing Sn4+ incorporating from 5% weight ratio until reaching 85%. The results obtained that the optimum conditions for working Sn:TiO2 as a DSSCs are 5%Sn incorporation ratio and pH = 3. EIS measurements were used to quantify the kinetics of interfacial charge transfer, such as chemical capacitance, electron recombination lifespan, charge transfer resistance, charge collection efficiency, and charge transfer resistance. Enhanced power conversion is equal to 12.32% for %5Sn:TiO2/based N3 dye/Ag at pH = 3 by using solar simulator (100 mW/cm2).

The Effect of Different Dopants on the Performance of SnO2‐based Dye‐sensitized Solar Cells

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Enhancing the performance of dye-sensitized solar cells: doping SnO2 photoanodes with Al to simultaneously improve conduction band and electron lifetime

Sn-Doped TiO2 Photoanode for Dye-Sensitized Solar Cells

Influence of Sn Source on the Performance of Dye-Sensitized Solar Cells Based on Sn-doped TiO2 Photoanodes: A Strategy for Choosing an Appropriate Doping Source

Impacts of ZnO/TiO<sub>2</sub> Assorted Electrode on Photoelectric Characteristics of Dye-Sensitized Solar Cells

Impacts of ZnO/TiO 2 Assorted Electrode on Photoelectric Characteristics of Dye-Sensitized Solar Cells

Nanostructured SnO2 Photoanode-Based Dye-Sensitized Solar Cells

Zinc Oxide Precursor Treatment for Improving Dye-Sensitized Solar Cell Efficiency

Improving Photovoltaic Performance of Dye-Sensitized Solar Cells by Doping SnO2 Compact Layer with Potassium

Improved photovoltaic performance of dye-sensitized solar cells (DSSCs) by Zn + Mg co-doped TiO2 electrode

An Efficient Dye-Sensitive Solar Cell Based on Ag2O/ZnO Natural Dyes Modified by Gold Nanoparticles

Zinc-doping in TiO 2 films to enhance photovoltaic performance of Dye-sensitized solar cells

Zinc-Doping Effects on the Trap State Distribution and Charge Recombination in the Anode of Tio2 Dye-Sensitized Solar Cells

Photoelectric Performance Optimization of Dye-Sensitized Solar Cells Based on ZnO-TiO2 Composite Nanofibers

Fabrication of TiO2 photoelectrodes doped with copper and zirconium to improve electron generation and flow in dye-sensitized solar cell

Porous Tin Oxide Nanosheets with Enhanced Conversion Efficiency As Dye-Sensitized Solar Cell Electrode

Electron transport in dye-sanitized solar cell with tin-doped titanium dioxide as photoanode materials

Enhancing DSSC Performance through Manipulation of the Size of ZnO Nanorods

High-efficiency Dye-Sensitized Solar Cells Based on the Composite Photoanodes of SnO2 Nanoparticles/zno Nanotetrapods.

Zinc-Doping in TiO<sub>2 </sub>Films to Enhance Photovoltaic Performance of Dye-Sensitized Solar Cells