Abstract:Antimony-based electrodes are widely used in various fields for pH detection due to their low cost. However, their application in the marine environment is significantly hampered by the significant potential drift observed in seawater pH measurements. This study focuses on enhancing the stability of the pure antimony electrode by doping various amounts of copper without compromising its pH response. A series of electrochemical tests demonstrated that the fabricated alloy electrodes exhibited excellent pH response characteristics, including sensitivity, ion selectivity, response time, reversibility, and temperature coefficient. Moreover, the alloy electrodes were more resistant to corrosion than the pure antimony electrode, thereby guaranteeing the stability. Notably, the alloy electrodes containing the 63 at% and 70 at% antimony exhibited the superior electrochemical characteristics. The surface analysis elucidated that the alloy electrode had reduced oxidation, surface cracks and antimony peeling compared to the pure antimony electrode. Furthermore, the prepared alloy electrodes exhibited excellent pH response and stability in simulated high-salinity seawater and real seawater. The above results highlight that doping cheap copper into antimony can improve the electrode stability by enhancing the corrosion resistance and slowing down the oxidation rate, thus enabling reliable long-time operation in a relatively stable state. These findings provide experimental support for developing novel pH electrodes based on the non-noble metals for use in challenging environments such as seawater.

An Antimony Oxide Ph Electrode for Tissue Culture Medium

Capillary Melt Method for Micro Antimony Oxide pH Electrode

Carbonate‐Melt Oxidized Iridium Wire for Ph Sensing

A pH Electrode Based on Melt-Oxidized Iridium Oxide

A long-term stable iridium oxide pH electrode

An Improved Method of Preparing Iridium Oxide Electrode Based on Carbonate-Melt Oxidation Mechanism

Tissue-like Conductive Ti<sub>3</sub>C<sub>2</sub>/Sodium Alginate Hybrid Hydrogel for Electrochemical Sensing

A New Electroplated Ir/Ir（OH） X Ph Electrode and Its Application in the Coastal Areas of Newport Harbor, California

Characterization and Application of a Metallic Tungsten Electrode for Potentiometric Ph Measurements

Preparation and application of Cu-doped antimony electrode to improve the performance of pH measurement in seawater

Base-metal Oxide Semiconductor Electrodes for PPCP Degradation: Ti-doped Α-Fe2o3 for Sulfosalicylic Acid Oxidation As an Example.

Development of SPEEK-Coated IrOx Sensor for High-Biomass Aquatic Ph Monitoring

An All-Solid-state Ion-Selective Electrode with Ag3AsO4 As the Sensitive Membrane for Detecting Arsenate in Aqueous Environments

Fabrication and Characterization of Iridium Oxide pH Microelectrodes Based on Sputter Deposition Method

Development of Miniaturized Microneedle Potentiometric Sensors for Real-Time Label-Free pH Detection Using AgIO3/Ag/PTFE/WO3/W

New All-Solid-state Carbonate Ion-Selective Electrode with Ag 2 CO 3 -Baco 3 As Sensitive Films

Iridium Oxide Nanoparticles Modified Carbon Fiber Microelectrodes for Ph Detection

Anodically Grown Pt(II) Oxide Microelectrode/Nanoelectrode pH Sensor

A Fabrication of Iridium Oxide Film Ph Micro-Sensor on Pt Ultramicroelectrode and Its Application on In-Situ Ph Distribution of 316L Stainless Steel Corrosion at Open Circuit Potential

An Integrated Solid-State pH Microelectrode Prepared Using Microfabrication

Low-Temperature Processed Metal Oxides and Ion-Exchanging Surfaces as pH Sensor